dat521gatherer Posted August 21, 2011 Report Share Posted August 21, 2011 75 b210 automatic. I have to push really hard to get the parking gear to engauge. Is this an easy adjustment? It wont turn over unless the parking gear is engauged either. any help is much appreciated. Quote Link to comment
ggzilla Posted August 21, 2011 Report Share Posted August 21, 2011 Yes, easy adjustment. The shifter is in the console. The adjustment of linkage is as important as "Inspection of oil level" for the automatic transmission. Therfore, great care should be exercised because defective adjustment will result in the breakdown of the transmission. 1. Prior to installing control knob, set the dimension "A" to 11 to 12 mm 2. Install control knob on lever. At the same time, check the dimension "B" and adjust it to 0.1 to 1.1 mm by turning pusher 3. Loosen adjust nuts. Set control lever and selctor lever at "N" position, moreover, set the clearance "C" to 1 mm by turning in or out adjusting nuts at trunnion with connectors selector range lever. After adjusting make sure that control lever can be set in any position correctly and that selector lever operates properly without any binding. All you need to do this is the factory service manual. Quote Link to comment
josh_t Posted August 21, 2011 Report Share Posted August 21, 2011 if you are unlucky like me, all the bushings are completely gone in the shift linkage. not a hard fix though. Quote Link to comment
dat521gatherer Posted August 21, 2011 Author Report Share Posted August 21, 2011 Damn. I go and pressure wash the under side 2ND TIME NOW and the soap is out on the high pressure setting. AGAIN!! I have the service manual. I'll study it tonight. Quote Link to comment
dat521gatherer Posted August 21, 2011 Author Report Share Posted August 21, 2011 Damn. I go and pressure wash the under side 2ND TIME NOW and the soap is out on the high pressure setting. AGAIN!! I have the service manual. I'll study it tonight. Thanks for the replies. Quote Link to comment
dat521gatherer Posted August 21, 2011 Author Report Share Posted August 21, 2011 Stupid me. :rolleyes: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.