Jump to content

521 lowering


Recommended Posts

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

  • 2 weeks later...
  • 2 weeks later...

To lift a 521 is completely different than lowering it. The rear is pretty easy depending on how much you want to lift it. Adding a longer spring shackle will get you about an inch, i dont recommend going any further with a shackle because it really starts to screw up your pinion angle. If you want to go any higher in the rear you will have to fabricate spring seats on the top of your axle to do a "spring over conversion". Front is easy if you want an inch or two, just crank up the torsion rods. It will ride like shit and you alignment will be pretty screwed up but thats about all you can do for the front other that making new A arm mounts and re doing the whole steering system geometry.



I honestly belive in 2x4= down, 4x4= up. its hard to do the opposite, and it dosen't make much sense.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

By using this site, you agree to our Terms of Use.