671rider Posted December 19, 2009 Report Share Posted December 19, 2009 hows the best way to put air bags on my 620 Quote Link to comment
kaoss Posted December 20, 2009 Report Share Posted December 20, 2009 Pretty vaige question! So vaige answer: With a 220volt welder, grinder, and sawzall! There are general rules that apply to all bagging all trucks. I would start with reading this: http://www.streetsource.com/forum/topic.aspx?topic_id=85853&Page=1 It'll give you some good points about rear suspension design, and if there is anything there that you don't understand, research until you do. Then there is the front to deal with. Slammy on here recently bagged a 620, as well as beebani. And there are also two build thread from a couple guys from Australia that have bagged theirs, all great resources. What's your knowledge on air management systems? Air bags, fittings, lines, valves, water traps, air tanks, compressors, relays, switches, gauges, notches, brackets, flow controls, Im sure there are some other peaces that I'm missing to make it all work. Quote Link to comment
Z-train Posted December 20, 2009 Report Share Posted December 20, 2009 hows the best way to put air bags on my 620 Simplest would be to have your GF or wife sit in the passenger seat.Easily removeable if needed-just fling the door open and take a hard left turn. Quote Link to comment
kaoss Posted December 20, 2009 Report Share Posted December 20, 2009 He said air bags, not fun bags! Quote Link to comment
Z-train Posted December 20, 2009 Report Share Posted December 20, 2009 :blink: He said air bags, not fun bags! Some have both.:lol: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.