bazchch Posted October 26, 2009 Report Share Posted October 26, 2009 got an sr20de and loom and ecu from a u13 nissan looking for pinout to get this running,of the factory ecu. the knock sensor wires is not apart of the main engine loom any one know how to add these in to the engine loom[pins] car is going to be a track car , so i only need power and earth to the ecu pinout to a power switch, ' or do i need relays etc fans will be on a switch and fuel pump power straight from the main switch any help would be great would like to get engine wired and running before the roll cage goes in'' thanks baz:D Quote Link to comment
freaky510 Posted October 26, 2009 Report Share Posted October 26, 2009 http://forum.ratsun.net/showthread.php?t=549 :) Quote Link to comment
bazchch Posted October 27, 2009 Author Report Share Posted October 27, 2009 mine has 3 plugs coming from the main ecu plug. it was from a 1994 u13 bluebird sr20de non turbo 1st is 8 pin plug [white] white wire orange white,green stripe pink,black stripe big black with red stripe white small grey 2nd plug black flat style plug black orange with blue stripe green purple green with black stripe WHITE FLAT STYLE PLUG WHITE GREEN,BLACK stripe yellow,black stripe green,white yellow,red black yellow grey,red stripe green,brown yellow lightgreen,red yellow,blue blue,black yellow,green i have some pics of the loom and wires but not sure how to add them to here Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.