FNLO620 Posted June 2, 2009 Report Share Posted June 2, 2009 My dad has a 92?(i think) Hardbody 4x4 and his clutch wont engage. He was having trouble with the clutch not disengaging so we replaced the slave cylinder and the clutch master cylinder and he drove it a little bit, but said that it acted like we didn't get all of the air out. We bled it again and now the clutch wont engage at all. I am lost on what to do. He even pulled the slave cylinder off of the side of the trans and still nothing. Any help would be greatly appreciated. Quote Link to comment
motavated Posted June 2, 2009 Report Share Posted June 2, 2009 If its anything like a 240sx. There are two places to bleed it from. A little box were the hose connects? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.