tad70

i add the pics \

my 73 has one. no idea when it was installed but it looks just as old as everything else under there. currently at work I will post a pic as soon as i can. i just got done replacing the center link and tie rods. i just left it alone. Not sure why they are upside down. Its a lot smaller than that is a sold by rockauto

thank you very much for all the info. I will make sure to save it for future reference. I did measure the center link and made sure it was the same length as the old one.

I replaced by tie rods, center link and sway bar links on my 73. As far as getting it aligned is it just pulling off the steering wheel setting that straight and turning the center link until the wheels are straight?

I hear ya datzenmike. But at 5'7" and 160lbs the seats fit good and yeah the seats are old but so is the truck. LOL

Not sure? The pics come up for me.

So, i finally got around to installing one of my buckets seats. I just need to weld the bracket to the floor underneath and get better bolts.

yesterday a deer jumped out and side swiped my 89 accord taking out my mirror and messing up my left fender and side marker. went to the junkyard looking for parts. no luck. the honda section is at the front of the entrance. I decide to walk towards the nissan section which is towards the back corner and i came across and 86 single cab 720 stick shift the engine was already gone...however i was able to take the entire center console and the seats for 140. having no luck loading pics.

Thanks for all the replies and information. I am mechanically inclined, 26 year A&P mechanic; however, my patience isn’t what it once was. But I will look into the kit mentioned by Vicdat and continue reading thru all the old post.

So, I'm looking at changing my distributor out for and electronic one. Are there any better choices out there than HotSparks or Ebay. There is nothing here in the Junkyards in San Antonio, Tx. Parts stores don't carry new distributors. I'm thinking Hotsparks or Ebay is the only thing available now?

yes, its on a fuse. yeah mine works the same way

I installed a volvo dual speed fan today along with the relays and BMW temp sensor. had no room to install on the inside so i installed it as a puller. its super loud. Had my truck idling for about 25 min. and both speeds kicked in. .. just need to clean it up. with the fan running high my battery was at 13.94. the bracket around the fan i took from a volvo as well. url=https://postimages.org/][/url]

with lights yeah...heater no...

I installed a Saturn alternator in my 1973 620. The alternator is from a 95 SL got it from Autzone. I had no clearance issues nor did i have to trim the alternator bracket. At idle its about 13.64...thanks to all that did this before and left write-ups to follow.