JDMonster Posted August 15, 2014 Report Share Posted August 15, 2014 I got a replacement since the previous owner had gutted the original. Now I'm getting ready to put the dash back together but I don't see how this was designed to attach to the dash. Anyone have pictures as to how this originally attached to the dash. Quote Link to comment
Tristin Posted August 15, 2014 Report Share Posted August 15, 2014 The radio goes in the dash from behind. You're missing a horizontal bracket that runs through the middle of the radio opening. The radio goes behind that... The plate your holding goes in front of the bracket. You then have two very thin nuts (basically threaded washers) that screw down over the radio selector knobs posts that are now sticking through both the bracket and the fascia piece in your hand. Then you pop on the radio knobs. So you need to fabricate the bracket back into your dash and you need to install the stock radio. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.