really_drunk Posted May 11, 2012 Report Share Posted May 11, 2012 I can't find 1 of these to save my life.. Has anyone tried a universal hose or found a work around? It's for a 70' 521.. Any help is appreciated!! Quote Link to comment
MicroMachinery Posted May 11, 2012 Report Share Posted May 11, 2012 What I did was found the spout for a 68-69' 521. It's a crooked, metal tube that attaches to the fill hole where the original rubber one was. Once that's installed, you just need a short section of the appropriate sized fuel hose and some clamps to connect the lower end to the fuel tank. 1 Quote Link to comment
Laecaon Posted May 11, 2012 Report Share Posted May 11, 2012 Might be a good time to upgrade to say a 720/D21 spout. This would allow the gas pumps to stay in without you holding it. Quote Link to comment
71ka510 Posted May 12, 2012 Report Share Posted May 12, 2012 i went thise route ;) http://dimequarterly.blogspot.com/#!/2011/09/tech-how-to-unleaded-filler-neck.html Quote Link to comment
haruspex Posted May 12, 2012 Report Share Posted May 12, 2012 I've seen the hot rod guys around here use copper tubing. It's easy to bend and comes in a gajillion sizes. Quote Link to comment
really_drunk Posted May 12, 2012 Author Report Share Posted May 12, 2012 Thx 4 the input guys I'm takin it all into consideration! Quote Link to comment
really_drunk Posted May 12, 2012 Author Report Share Posted May 12, 2012 Still open for input ... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.