poor-mans-720 Posted March 13, 2012 Report Share Posted March 13, 2012 So i am going to a local machine shop to get some spacers machined. Want to know if there are people out there that want some. I think it would be cheaper for me to make a bunch instead of just two. Will sell them for cheaper then you can find on the net for sure. I know someone had 43 made... yea, 43, it was the same price if he had 42 made. They charged by the hour. Well he used one set and sold another. Paid for all the machining just like that and he charged less then a third for the second pair... I know alot of toyota guys do this and they love the ride afterwards. Gets the upper control arm off the bump stops. gives about an 1.5" of lift too... Will be an 1.5" made out of aluminum... comes with 4 grade 8 bolts that are 2 inches long. perfect length to go all the way to the bottom of the threads of the ball joint. look something like this. http://www.4crawler.com/4x4/ForSale/Images/BallJointSpacer.jpg Quote Link to comment
poor-mans-720 Posted April 12, 2012 Author Report Share Posted April 12, 2012 hey hey hey... here is the aluminum, been at the machinist a couple days. should be getting a call soon on em... PM sent to those who showed intrest. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.