CoilOVerKid Posted April 20, 2011 Report Share Posted April 20, 2011 I've just recently found but not purchased a set of extra baller appliance mesh wheels. 15x8 and 15x10. Problem is they are 5x120 bolt pattern. Can the y be re drilled to our bolt pattern provided I find a good machinist with the proper equipment?? Quote Link to comment
Radim Posted April 20, 2011 Report Share Posted April 20, 2011 Bring them to me, i'll do the for cheaper than anywhere else. :) I redrilled some 5x120 BBS RSs, and some BMW 5x120 Stock Meshies to 4x100... 4x114 wouldn't be a problem given the centerbore hole isn't huge. Could probably even redrill them to 6x139. :) Quote Link to comment
CoilOVerKid Posted April 20, 2011 Author Report Share Posted April 20, 2011 What do ypu consider huge?? Ill pm you the size when I get the info. Quote Link to comment
Radim Posted April 20, 2011 Report Share Posted April 20, 2011 75mm and lower is perfect, anything higher you're cutting it close but would probably still work. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.