sr311det Posted August 6, 2010 Report Share Posted August 6, 2010 Up for sale is a 2004 Subaru WRX LSD differential with 4:11 gears and is a vicious center section. The CV's are 280zx outer cv with a 2004 Subaru inner cv. The axles started life as a 280zx axle and then shortened and respined by Dutchman's up in Portland. They have new boots and grease and come with ARP hardware for the outer CV. I have had this in my car of about 3 years and worked great. The outer flanges are 280zx companion flanges that bolt on to all stock 510 a-arms. The CV's were powdercoated a gunmetal color. The driveshaft flange had been swapped to utilize the stock 510 bolt pattern. This is 100% bolt in set up for a stock 510. I'm building the exact same set up but utilizing a R180 out of a sti. Feel free to email me at straw_e510@hotmail.com Price: 500 + shipping and I'm located in Corvallis, Oregon. 1 Link to comment
matwood Posted August 6, 2010 Report Share Posted August 6, 2010 how much shipped to 88220? I CANNOT find any CLSD R-160's around here.. And how much did you end up spending on the custom CV's and resplining?? I may end up going that route cause I can find some VLSD's around still but I'm still in planning stage. Thanks a ton man, Madison... Link to comment
sr311det Posted August 6, 2010 Author Report Share Posted August 6, 2010 And how much did you end up spending on the custom CV's and resplining?? Don't remember over three years ago. Shipping is pretty expensive coming in at 74.00 dollars ground. Thanks Link to comment
Skib Posted August 6, 2010 Report Share Posted August 6, 2010 how long are the axles? Link to comment
Recommended Posts