Jump to content

1970 521 Pickup bagged project


Recommended Posts

I have a 70 521 that I got in a trade about a year ago. aAt one time the previous owner was on this board.

This truck starts and runs but it smoke just a little when you step on it. The charging system works as well as the on board air compressor. I started doing rear disc conversion and never finished it.

The Good: Very minimal rust on the whole truck. Floors and rockers are really good.

Converted to cs130 alternator wired up properly with a "good" tensioner.

engine driven sanden 508 compressor for the air ride.

Bag set up with triangulated 4 link in the rear

Brand new rear axle bearings and seals. Brand new Beebani rear disc brackets with brand new rotors, pads and rebuilt calipers.

The bad: Rear brake conversion needs the metal lines ran and hooked up to the hoses.

Master cylinder needs to be upgraded and front brakes need to be converted.

Motor smokes a little when you step down on it.

This truck could be a driver if the brakes were fixed. I started doing it but I have a 51 Chevy that I am also working on. Need to get rid of this truck.

I am asking 1800.00 O.B.O.

 

idrx8m.jpg

24fy5o1.jpg

1zoyrut.jpg

 

10eqb9w.jpg

 

2iscsxu.jpgcom/25ow2ts.jpg[/img]

Link to comment
  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I remember this truck from the 521 picture thread! Wondered what happened to it. Looks like a lot of love went into it. Good luck with the sale!

Link to comment
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.