Coop
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Classifieds
Posts posted by Coop
-
-
On 4/11/2021 at 8:42 AM, mklotz70 said:
I'll try to do a video fairly soon. I just got the other 4 pieces in from the last recommendation......they're the ones. In fact, the four of them are cheaper shipped than I can make/ship them for......so I will NOT be making them. I'm going to contact them about ordering a bunch to go with the kingpin kits, but I will not be reselling them by themselves. I'd have to mark them up and my shipping is a lot more. I'll post the info for them on my site when I post the kingpins for sale.
Just ordered a few, thanks so much! I can't believe this was figured out so quickly.
Thanks,
- 2
-
On 3/20/2021 at 11:44 PM, debbheff@gmail.com said:
continuing, i've started it a couple of time and no smoking although run time was seconds. still sorting out coolant and heater hoses and still havnt got fuel tank back from shop. on to other things front brakes redone as well as new fulcrum pins, did i mention i discovered the big Healy fulcrum pins are the same as the Datsun pins. good info for anyone searching for pins, and cheap also, relatively speaking that is.
I just started a thread looking for cotter bolts that wedge into the fulcrum pin. If these sets are the same I know everyone posting on that thread would want to hear more!
I am also looking for a rebuild kit for my fulcrum pins so this would be an amazing find- 1
-
3 minutes ago, banzai510(hainz) said:
get 4 of them!!!!!!!!!!!!!!!!!
Honestly... I would buy 10 of them if they were being custom made. Never want to run into this problem again lol
- 2
-
9 hours ago, mklotz70 said:
I've made the cotter bolts before.....and I'll be making more again soon to go with the 50 kingpin sets I just bought. I'll try to get back to this soon, but I have to head to work right now.
Well when those cotter bolts get made, you have a buyer for 2 of them 100%!
PM me when you might have a timeline. I'm doing a full rebuild down to sandblasting the frame so no real rush on my end, as long as I know they are coming at some point in the somewhat near future- 2
-
Hey Everyone,
I am rebuilding my 1969 521 (will make a post shortly!)
Am currently just finishing a long fight of drilling out my cotter bolts that wedge into the Fulcrum Pin.
I need 2 new cotter bolts for this, and figured I would ask before having these custom made by a machinist.
1) Is there anyone on the forum that might have some of these cotter bolts that I could purchase, OR
2) If I were to have a batch custom made, is that something that might get attention on this site?
Thanks and GLTA
- 1
521 Cotter Pin / Bolts
in 521
Posted
Just wanted to let everyone know, I have ordered some seals for the fulcrum that I have been told might work. I will post photos when installed. About a 4 week wait as they were out of stock. But will update on fitment
https://www.thewedgeshopstore.com/seal-king-pin-lower-mgb/