720Phil

My 81 KC 4x4 was minding its own business one Saturday night last October when along comes a brand new Z71 with a slightly tipsy driver. https://photos.google.com/photo/AF1QipNZt1NFOgyDj9ARL6sXZAwgwi2fDIpByqmd1mP7 https://photos.google.com/photo/AF1QipPRlB9LMlPxQagp6q-h7xbcpzTgQ6SQVpad1_Uj Sorry, I couldn't get the photos to upload. The Z71 had to be towed, I could have boosted the Datsun and driven it! Needless to say I'm going to need some parts. I have located the lower part of the bed and an original left tail light. What I need some help on is what to call the housing around the tail light. Knowing what to call something is half the battle sometimes. I'll post on parts for sale (needed) when I learn what to call some of the parts I'm looking for. Thanks!

OK, OldHillBilly has sent me the info from tag from under the hood. Can anyone decipher it? Tag reads as follows: DATSUN type - KHY720, Engine Capacity - 1952cc, Max HP/ RPM - 92/ 5200RPM(sae), Wheel Base - 2815mm, Engine Type - L20B, Chassis Number - KHY720-********, Nissan Motor Co., LTD, Yokohama Japan 44W11. Tag apparently does not say list Transmission or Trans axle directly. Phil

I will check the diameter and count the splines. Will that help?

Checked the front last night (the old mark it and spin it routine) and the drive shaft was just about to complete its 4th revolution when the mark on the on the left flange made its 1st revolution. So a 3.889 it is! So does that make this easier or impossible? Phil

Anybody know what HE38 means?

Hmmmmmmmmmm. Just looked under my hood at the codes. Never mind I have removed my Diff and counted the ring and pinion and did the math to come up with the 4.375. I had a friend help me and he is an off-road guy, and we both counted the same thing. The VIN says I should have a 4.375. My tag says FS5W718 HE38! The reason this disturbs me is now I wonder whats in the front Diff? Any guess? Phil

Looking for Ring and Pinion or complete 3rd member for a 81' KC 4x4. H190A with 4.375:1 ratio. Thanks, Phil

Do you know which rear differental you have? I need a H190a 4.375:1. I am having a hard time finding ring and pinon for mine. Thanks, Phil