savag

12 hours ago, heywier427 said:

Itb's or turbo. 

 

Those are your only options ?

Itb for now, but I may turbo in the future

/

http://

just a little update

Hey guys havnt been on here in a while. Been busy with new house and while moving process/remodeling and now baby on the way. Datsun has been sitting since August last year when my carb went out I believe .seems like it's just flooding with fuel and I didn't have much time to mess with it. I just recently picked up this beams 3sge blacktop that I will be swapping in the 510 this winter. I will have the engine up for sale once I pull it if anyone is interested. It's an l16 that was rebuilt by previous owner and then the car sat until I purchased it. I put about 20k miles on the engine with no issues at all. Did compression test on it after my carb went out and it read 205 all cylinders. If anyone is interested jusy pm me. Also will come with headers and trans. New clutch kit 5k miles ago and full tune up

Lol nah im going sr20 in the future, changed plans. Got something in mind that i will be building but for now, he l16 is fine (: thanks for props

NOOOO!! K20? or whatever honda motor!

Dude it's a datsun for Ratsun's sake.

And a 68 too, have fun with an L, don't mess up the dash at least.

 

Your car your choices,

I'm hating tho :(

Yeah i was thinking +20 as well. Its a custom coilover kit i put together and its a stock 510 strut with custom brake rotor and caliper bracket to bolt up the wilwood caliper

I run +25mm Rota RBs  with a 195 /45 series  with stock 510 struts with a coil over and perch welded at the stock height(so dont hit top of tire,perch and spring))  using a 7 inch Eibach spring

 

some 205s up front might hit depending on brand as not all 205s are the same  205 in back is fine. would go 195s up front myself

 

maybe a +20 would be better.

 

saw the brakes you got there but that dont look stock 510 to me? looks 280zz (not stock 510)

so I'm looking in purchasing some new wheels for the dime. 15x7 all around for easy fitment. I dont have zx struts up front. My question is, whats a good offset to run on a 15x7 wheel with 205/50/15 tire setup? I was guessing like +20 but want to double check before i purchase anything

sweet find, love the color

hey guys so decided to go with a different engine swap route and gonna keep the l16 in there for now. I was looking into getting a aftermarket exhaust manifold installed and was kinda looking at it and had a question, does the intake manifold have to come off in order to get the exhaust header out?

Also was looking to get a new intake/exhaust gasket and noticed there was some that have oval ports and some round, did the l16 head come with different ports?

thanks for ur input in advance

It was out of a 96 jetta 2.0 liter

I'll get pictures of the brakes on the car a little later. BTW I work at a shop and we will be selling this brake kit very soon if anyone is interested

Do you have a pic of the Jetta radiator?

Fits perfectly to the top. EVen if using stock shroud and fan.

If you leave the side plastic tabs on it fits really tight from frame rail to frame rail.

Another erason its great is because it has these tabs on both sides that you can put a screw in so i drilled holes behind the grill and put a screw into the tab to hold it

Only thing is you have to instal an inline filler neck because these radiators on the jetta are with an external pressure resevoir.

So i did some research and went with the jetta radiator for now. Fits perfectly and cools great so far. DId full tune up on the engine, ( spark plugs, wires, cap, rotor and fuel filter ) cost me $35!

Heres some pix i have, will post more later.

Hey guys been MIA for a while busy with the shop life. But i finally got the custom coilover setup and big brake set up on and got the 510 running with the l16 in it. Drove it for a day and noticed the radiator leaking. So i decided to drive it for another day after flushing the radiator and it just went out on me with these hot cali days. Anyone have a stock rad for sale or shud i just go with a aluminum one? Will post pix later

What's the widest wheel u can run up front with the 280zx strut?

No yeah I agree with you. Kinda new to this Datsun game and was just gonna make something work since not much people offer full coilover sets for the Datsun 510 suspension. Also wouldn't running the lower offset 510 hubs alow you to run a wider wheel since width usually isn't measured in offset goin towards your fender but goin towards the shock?

Wat I ment to say was using the 280zx spindle brings in ur wheels bout 3/4in inside. The setup I'm trying to make will allow u to use a 11.02in rotor instead of the 9.92in rotor that is used on the 280zx and also will come wit a custom bracket and wilwood caliper and all on the stock 510 hub that will already have the coilover welded up and ready for bolt in to the 510.

Not camber sorry, but the offset

From what I read, when using the 280z front suspension it adds positive camber? Unless I am wrong, anything is possible. I will look into the rear disk brake upgrade using stock brake cables

Also if this coilover kit works out, it wud be a direct bolt in for front and rear.

That way I can use same offset wheels all around and don't have to bother looking for 280z front suspension if I want lowering springs or bigger brakes

Also if everything works out as planned, if anyone is interested I will be making extra sets. Didn't really introduce myself but we are a BMW shop that restores BMW e30's/2002 and do a lot of custom fabricating so I'll keep yah posted on what I figure with the Datsun.

Sorry guys been waiting on some coilovers and custom brake caliper brackets. In process of making a coilover kit for the 510 that will allow me to use stock front hubs and not switching over to the 280z suspension while also using a 11in rotor with wilwood calipers all with the stock 510 hubs. Doing suspension and brakes first, engine will be next sometime beginning of next year or so

Good to know, I'll keep yah posted with the progress then as I move along

I kno I'll get a lot of hate on this build but this is an awesome car and an awesome engine

So a little teaser photo... Not sure if ill stick with the ITB's or go turbo since i already have the turbo exhaust manifold (f20c) :D