DesertRat368

thanks for the info pistons should be here tomorrow then off to the machine shop head is going in too for an overhaul will have pics after machine work :)

well im going to the 280 z pistons that is going to be nice

even with the head shaved would it still run on pump 91 is the highest out here looking to get a cam done to but dont know what one would work best if i do go with the 280z pistons

all i know is that it is an a87 peanut has been cut just shy of the numbers and letters

looking to find out compression ratios for the L20B with 280z dished pistons on a87 peanut head looking to bore out block 20 over but cant find any and was told about early 280 ]z pistons work on L20 rods just a smaller dish and about a 40 overbore if someone could help out that would be awesome looking to get her to the machine shop

Been searching for over sized pistons for my block but having little luck i bought some from rock auto but they called the next day and i was told they were out and i cant find any others hopefully get some feed back looking so take it to the machine shop this week

What shape are the other cams L20 is what im interested in