Toyanvil Posted April 14, 2013 Report Share Posted April 14, 2013 I have a stock rebuilt A14 with 32/36 Weber that I installed a new cam in and now I can not get it to idle. Over a 1000 rpm it runs great, but under it wants to stall. I am thinking it maybe to big, but before I pull it out and go back to stock, I thought I would see if anyone has an ideas. I am going to try adjusting the valves to ( in .016 & ex .018) Here is the info of the cam. A14 684 8614 2G14 N-02 A15 Japan H50 M V 283 vo grind 272 degree duration @ .012 109 degree lode sep .424 lift Clearance In .014 Ex .016 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.