Wrench Turner

Again I Dont know enough about datsuns to understand. Dogleg? this would be the "cool" tranny with reverse to the left and up as apposed to right and down? is there an easier way to bench shift these bad boys without the gearshift? (using a 1/2" extension now) There is some wierd things going on also. Looked at the 1200 club ID page. Seems to be a 60L for an A series Dogleg. Now here is the wierd stuff. bout 2" in front of shifting point there is a bulg in the case where the shift lever is in. Old tranny has a spot that looks like a bolt going through the case right at the top of the bulge. New tranny has two ribs and the "bolt" goes through the underside of the buldge. There is also a spot on the left side of the tranny for a large sensor that is not on the old one. (tail section) And there is another sensor on the right side that is not even prepped for in the case of the old tranny. can someone host the pics? I can never get them to post. PM an email and I will out uo some pics to help ID. Nick

Found a 5 speed 60L for a A14. However before I get it the old one is a 60A. The 60L works so I wont need parts for the other. I can just bolt this in corect? It has the correct bell housing for the A. Not sure what tthe L and A are about? Can some one help me here? So basically swapping a FS5W60A for a FS5W60L. Is this OK or is there problems with this? :unsure: Nick

I have. They do not carry any parts for FS5W60A. He said there might be a used one in the back somewhere depending on if its rally shift or standard H. What is the FS5W71C they have listed? Also my Haynes Datsun 210 1979-1982 Book also has no FS5W60A. They have F4W56A - F4W60L and FS5W60L. Forgive my ignorance but why not the one I have? Nick

It is missing completely. Without one its basically a big paper weight :( And I only need ONE. Thanks Nick

Need 1 Bulk Ring for FS5W60A transmission. Nissan Part # 32604 H9700. New is preffered but a used one in GOOD condition will do at this point, I live in Oregon and would be willing to travel into washington if need be. Will pay for shipping. I am really hoping someone has one laying around. Nissan has NONE in any warehouse or parts/service dept. Thanks Nick

Any other Suggestions? Atfer talking to Nissan again, Having them do there "database" search I have Found NONE at any nissan dealer, parts or warehouse. At this point I am open to all Ideas. I will post a WTB in the classified section of the forum. Thanks for the help so far guys!! Nick

Really?? I called Nissan and was referred to another nissan who "had all the older books". He told me I was S.O.L and they were discontinued. Is this part# actually for a 210 or something else that uses the same bulk ring? Regardless I will call them again in the morning. Is there a specific Nissan dealer to call? Whats the number of the one YOU call? Thanks again for the speedy reply!! Nick Edit: BTW besides the age of these transmissions why is everything so hard for me to find? Are they used for swaps or what? Trans itself seems hard enough to find, let alone parts. But I am not a dastun guy really. 510's look pretty damn sweet though:)

Hello all, 1st post, so sorry if this is the wrong place or somethin easy ;) I am putting together a tranny for a coat tail friend of mine. However It is missing 1 of the "bulk rings" or "synchro ring". I have tried Nissan and other aftermarket companies but have had no luck. Can anyone here point me in the right direction? Tranny Code - FS5W 60A Car - 1982 Dastun 210 2dr. 72,000 orig miles:) motor - A14 Not sure if that helps but thats all the info I have on it at this time. Not sure if it's a H pattern shifter or not. But am Certaiin it is a 5sp as I have seen and assebled the gears, shafts etc. Thanks again for lookin... Nick