Sissyneck1

Thanks for the comments! Mike, I like what you did with your 710, very clean solution. Stinky, I may yet add more gussets/ reinforcements down the road.

Thanks! 6”x2” box tube, cut to a 3-1/4” radius and loped off the corner to match the factory bumper.

Got the itch to finally tackle this project, new bumper inspired by a Warrior Products bumper I saw on a Tacoma on Bring a Trailer. I decided to build a separate hitch while I was at it and I'm happy with how it all turned out. I've got a license plate mount with integrated LED in the mail as well (that's what the small hole is, wire chase.)

thanks Thomas, so I took the drivers side switch out and tried to reassemble it with the new passenger side switch replacement I had and it sort of worked with a few tweaks. Still no functioning light. Not sure if I’m grounding it properly or not. I also left the black and red wire off as it didn’t quite fit. I’m going to take it back out tomorrow and mess with it some more and I’ll post some pics to make this make sense. I’m also going to order a new bulb.

So it doesn’t even look broken necessarily, just like it’s missing the bracket to mount it, there’s three wires that I can see. Here’s a picture for a better idea. I’m mostly wondering if the bracket needs to serve as the ground or if it can be made out of anything (plastic or aluminum) https://www.imgur.com/a/Y8agEhl

Hi Everyone, first time posting on here but long time lurker. I have a 86 king cab 4x4 with a broken (surprise!) switch for the room light (dome light?) on the drivers side. I can’t really remember if I’ve ever had all the pieces or if the remaining part of the switch was just pushed into the B-Pilar when I bought the truck. Anyway… I’d like to repair it but I can’t really find a good reference for how to do that, every replacement switch I’ve found seems to be for the passenger side, including the one I bought before I’d actually investigated and realized they’re in fact, different. So I’m wondering does anyone have an intact drivers side switch they could photo and share here? Or better yet a source for an actual replacement? much appreciated!