seannn

Do you know where I could buy manual ones for the 720? I can't seen to find them

Automatic, But I don't mind changing to manual the thing is I wanna change both just to be sure. I'll store the old ones alteast for memories lol

Hello guys I've ran into a problem with my 720. Both of the locking hubs aren't good anymore and I need them kind of urgently because the road to my farm is muddy and i rlly need to enter to maintain my animals. Do you guys know in which website I could find the 26 spline ones. I only find 27 and 28 splines ones. Do you guys know what other makes are compatible incase I don't find for nissan. Thanks!

Hello guys I hope everything is going well, I have an question what is the circumference of the st steering wheel on a 1984 nissan datsun 720. I was thinking on buying a wrap I saw at an local shop in Mexico but I need the circumference of it and that car stayed at home lol

Thank you very much I would really appreciate it!

I was looking for the wires and they are no wires I am not sure if they were removed by someone. Do you know what each color wire from the switch is from. I have no idea how the switch wires work.

Harness side. It was connected to the switch plug but the harness plug was only the plastic no wires.

Hello I was having some problems with the hazards they didn't work when I looked at it, it didn't have the the plug well it was connected but the female side of the plug didn't have any wires only the plastic. Does anyone have any idea how to wire the 5 pin hazard?

Thank you very much!

Hello I realize that when I put it on 4wd it doesn't turn the green light on the dash. Where on the transfer case the pug for that is located?

Thank you very much and sorry for being repetitive, but which pin is 36 and 37 I just wanna be sure.

Yes I noticed that but I was referring to the switch inside. I don't know which pins are for the park lights since there's this community I need to pass to get to farm which requires you to have the park lighta on during the day and I've been stop by the patrol of the community since I have those wired with the headlights and they say it's only the sides that needs to turn on not the headlight since I have led lights so they say it's "distracting". What I've done these days y just disconect my low beams so they don't turn on but I am tired of that so I wanted to qirw it so they work like they supposed to with the switch but I can't find those pins lol

Hello people well I've been having this problem, until now I got time to mess around with the 720's light switch. I've been following a diagram I found online (because a manual that I ordered online cane water damaged) I shows me the pins for the left and right head lights. On the left 8 pin conector I noticed they are 2 pins thatthe diagram didn't say anything about but I had the idea of them being the park lights but i am not too sure. I've tested for continuity but they don't have I am not sure if it's the switch or if I am wrong about them being the park lights. Where do I locate Any plug or pins for the park lights.

Okay so this really makes alot of sense thank you very much!

Hello it's me again, I did the wiring with relays for the headlights but the inline fuse that I have for the lights keeps melting but doesn't pop. The wire is kinda hot as well so I would like to know if someone knows how much amps does the original 4x6 lights draw so i could buy new wire for the adequate power draw. I checked the connections and they weren't loose. I have all of them to one 25 amp relay since I did an rought estimate of 18 to 20 amps of draw (I know that wasn't the best thing to do lol). It melted my 20 amp fuse but yesterday I connected the dashboard lights to turn on with the headlight switch that I have too so I don't know if that was the reason for the fuse to melt since I don't know how much those little bulbs draw but I replaced it with an 25 amp fuse to see if that helps. so can I get help with that other question on the dash lights amp draw. Thanks!