davmoha

They are 15x7 with 0 offset. The gun metal wheels have 196-60-15 and the polished lip ones in the gallery link have 195-50-15. I lowered my Z so I needed to put the polished ones on. I have new stock shocks on my wagon at this time.

Finally installed my L20B and got my wagon running. Only down for 2.5 months. Swapped the wheels from the Z as well. More pics 510 Pics

I tinted the windows on my wagon in time for the summer. Now the A/C seems a lot colder. The next step is to install the newly rebuilt L20B.

Will put that on my list for Junkyard retrieval. Saw a 280 ZX in the yard the last time I went. Had plans to come back and get the tranny for as a spare for my Z. Guess I will look into the front suspension parts. Thanks. David.

I would put them on the Z but I already have these on there:

It is the stock 510 front end setup.. I only put on the Konigs and put lowering blocks on the rear.. I also cut and inch out on the front springs. The wheels are 0 offset. I would like the wheels to be flush with the front and rear.

I put some new wheels on and was wondering why the front wheels on my wagon stick out farther than the back and if there was something that I can do about it. I have had the original 13", some 14" slotted mags, and now these 15" Konig rewinds. All those wheels stick out farther up front. Is there a way to have it look flush with the fender without having to buy a skinnier wheel for the front? More Pics

Put some new wheels on my Wagon and lowered it a little. Here are the before and after pics: David M More Pics

I like the slots but would really like to have something different like Libre's, Turbo ZX rims, or Enkie Mesh. I also would like it to sit a little lower. David

Thanks, I was there with my friend Jim Frederick. We were on our way to that show. I had another buddy drive the wagon over for me. David

I bought the wagon for the rear seat. I already have a 240z with two seats. I needed the wagon because I have to boys and they have to take turns going to the carshow with me. Usually I put one car seat in and drive the younger one to the show. Then my wife follows in her car with the older. Then I swap car seats and the older one will get to ride home with me. Now with the wagon, I can just bring them both and leave the Z at home. I wasn't sure if people have just re-skinned their seats or went with a modified seat from another car.

I am looking for seat options for my 72 wagon. I am trying to decide if I should buy new skins or get some front seats from the junk yard. The problem is if I do that what do I do with the back seat. I checked through the pages on this forum and didn't see how people addressed this. My plans are to get new carpet, find some type of center console, and re-do the seats. I need suggestions on the seats and console. This is how it currently looks, there are rips in the bottom of the seats that can't be seen in the photo: David

I tried a new bulb on the passenger side and it still did the same thing. The fuse for the passenger side went hot when I set the bright lights. Without the brights the passenger side was very dim. I pulled the contacts and cleaned them and the fuse contacts as well. I am thinking there is a short somewhere.

tell me if this link works: Z and Wagon pics