mynes pretty good now. i mean im i. the ballpark, id upload this alignment sheet i have but i havnt fivured out how to yet. its fruztrating.
so ial quote y alignent report. currently i have camber -1°57 ps and 1°28 ds, caster should get better but currently i have +2°52 ps and +00°37 ds. so instead of grinding down the caster rod and running the 14mm thread down further im lookin at buying a 13/16 die and running it down past the step. using 2 nuts on each rod so i can adjust the caster and lock the furthest foward nut. hopfully ghat wittl sol e the caster problem and hopefully some of the camber problem. iam more leaning to folding my towers out as u did by notching my towers. im looking at dropping an l20b in with 5 speed so i.want to sort steering issues out first. i see you made your tie rods adjustable. do u or any body know if the 720 tie rods and ends will fit the 620 drag link. this info would be greatly use full. and hay thank you all so much for all the info im new to posting to forums and i highly appriciate everybodys knowlage and patientice