-
Posts
727 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Store
Classifieds
Posts posted by Sinnful
-
-
HAHA I figured Atom would at least have washed it before he drove it down. Glad it went to someone that will make sure someone will enjoy it, but damn my backyard is already looking bare since a couple Dimes have left now.....I should restock some maybe. haha
-
actually I have mine but give me some cash and yours and we be good........call or text is better me if you want 360.798.1340
-
I have one also, and Im located across the river in Vancouver so if it falls thru let me know
-
if you need a modified crossmember I have one sitting on my jig that is done, just have to send it to the powdercoaters. let me know if you need at
-
I know, I was just pitching you shit.
but thanks for doing some testing for me.........I apprecate it
-
Ah what interesting chain of event's i have had to day.
So ever since i got t boned in my 4 door a couple years ago. Every once and a while my left hand just kind of looses it's grip almost like it just short's out for a second.
Well on my way to work today I pulled in to burger king to get a egg biscuit sandwich thing. As I was pulling in to the parking lot I reached over with my right hand to turn down the stereo as I rolled over the parking lot drain holding the steering wheel with my left hand. well guess what! The drain is sunk in to the ground a bit so as i drove over it it ripped the wheel out of my left hand and as a grabbed the wheel with both hands and tried to correct what had just happened bam! I pegged a curb bent my wheel bent my Tye rod. hopped out of the car thinking great i just taco my rocker on the island I just hit. The rocker was fine but my tire was going flat so I hopped in the car drove a mile to my work on a flat . Got to work beet the wheel back in to shape so it can hold air. Called baxters ordered a new tye rod sleeve because mine had a 30 degree bend in it. Then tried to remove the tye rod sleeve ( thinking I could still use the tye rod end's but I was wrong the sleeve bent right in front of both tye rod ends)!.
I called baxters back sat on hold for 15 minutes asked them to order me two tye rod ends. The baxter employee tells me sorry man if you would have called 10 minutes sooner we could have thrown them on the last truck. :w00t: So I grab piece of fence post cramm it between the tye rod and frame bend the sleeve as close to straight as i can get. Then since they have i5 south detoured I took surface streets home. well my car did not like that on this hot ass day. the dang thing started running hot died out at a light and didn't want to start. At lower speeds under part throttle it is heating up but if i get up to a descent speed it will run ok . I beleave it because at low speed the air is going around the radiator and ic . so now I have to buy inner and outer tye rod ends buy tires for my other xxr's get an alignment and make radiator ducting/ seal up the area between the ic and the radiator and the area around the 2 so it forces the air through the ic and rad
damn all that and you dont mention how good my LCA's held up.........whatever, just whatever haha you should come over one of these days and put my SR in my car
-
and so any word on the shipping company????? I mean I know life and shit gets in teh way, but I only live a couple of hours from you so even if they were shipping it by horseback it should be here by now......
have they gave you a tracking number or anything?
-
so, is there any word on when you are shipping me that grill???? I have sent you an email on every email address I have for you and that would be a total of 3 with no answer on either. I would really like to know or I would like my money back for the deal..........
-
extremely BAD ASS, thanks for sharing with us and wow. what are your specs again?
-
yeah you need new pins. i have a spare set that I could probably part with since you need them on crunch time.
if you are interested PM me, Im south of you just outside of vancouver
-
It kind of reminds me of the offset control arm bushings... I would never run those on my dime, I would never trust them.
haha that is what Mikey just pulled out of his car when I sold him a set of my LCA's
-
when I had the boomerrang mounted on teh shell I had it on towards the rear
-
Damn,nice car
-
I have one set of brand new adjustable LCA's that are complete with heim joints and metric drilled stainless steel bushings and they are freshly powdercoated gloss black.
specs on the heims:
Housing is made from Chromoly Steel Alloy with a bright chrome polished finish. Ball is made from bearing steel and heat treated and hard chrome finished. Race is made from injection molded Nylon. Ultimate Radial Static Load - 27,019 lbs.
and I used weld in threaded bungs that are 3/4"-16 thread
the heims are 3/4"-16
price is 180.00 shipped with core. if you dont have a set of core then add 50.00
parts are in Battle ground,WA
-
-
-
do you have any driveine parts, heard 510's fit 200sx's, heres a link to my ISO post http://community.rat...wd/#entry673956 if you have one let me know :)
yeah I dont really have any driveline parts, sorry
-
that shifter looks cleaner than the one in my 510. how much?
10.00 plus shipping
-
of course I wouldn't mind if that was a picture of my shop but right now my shop has a couple of Landcruiser's and a harley and other projects in it
-
-
I want this one, whats your paypal?
-
shit at least you have been working on your shit, I haven't really touched mine yet. a couple projects have to get done before my Dime comes into my shop. but maybe( damnit it better be) it will be ready for Canby, for Jeremy's meet and greet I might just ride one of my Harley's or soimething
-
congrats, and looks like a beautiful place to get hitched.
I got married back on Feb. 14,2003.......to my Harley and haven't looked back since hahaha
- 1
-
phils other wagon
in Project Datto
Posted
Phil, do you need calipers still? I might still have my stock set since I put the Z32 calipers on