Power steering: I used 95 240sx rack & pinion I'm pretty sure you can use any year 240sx rack & pinion,complete steering column,center part of the cross member.
I used 86 300zx rack & pinion rods. Don't know what other years are compatible!
87 200sx steering connector this is the part that connects the shaft from the steering column to the rack.
95 subaru impreza tie rod ends. Again I don't know what other years are compatible!
Rack and pinion will fit perfect with this parts combined together.
this is the cross member
this is how it will look mounted
this is using s14 240sx steering column
mounting bracket for S14 steering column all by hand thats why it's a little crooked
cut the wings off S14 mounting bracket
weld wings from stock steering column to s14 column. you need an extra bracket at the lower end but I don't have a picture of it.
I used the S14 column because I wanted to have the tilt and be able to adjust my wheel.
welded flanges.
and this is the bracket at the end of the column. instead of using the s14 column boot I used a shifter boot from the S14.
my good friend Pedro did the final touch. DON'T FORGET TO VOTE FOR HIM!
S14 cluster
this is the stock S14 rod and 300z rod.