JCalais

Ah ok no worries.

Cab etc is pretty easy to bare metal your self, with paint stripper, wire wheels, nylon wheels etc etc.

are you getting entire thing blasted?

how much money is it costingyou to get is blasted

Been doing some body work on the roof and it seems to be really really flimsy? anyone else the same. the rooofs have no suport beams

Nice interior, dash looks good

Just checked ur link wheezie, Nice build!!

So far I havnt met anyone who owns a 620 here, I know there out there tho. have not seen another one besides the bagged and bodied blue one down south. Would like to meet more people with 620s here. Cheers

hey ggzilla, where the column goes into the box a few thing metal gaskets came out and a broken O-ring? and cant get the plug back on because the shaft on the inside the whole is crooked, im assuming it will straighted once everything is tight and alligned

Did you find parts for the steering box red13?

yeah got cab off last night with a few mates, Ill let you know on the steering box, i possibly do need it if it hasnt been pulled apart. Ill get those measurements for you today!

also anyone know if i can get a rebuild kit or gasket kit or anything for the steering box from anywherE?!

anyone know what the small cap that came off the end of the box is?

Didnt have one handy at the time haha.

Alright guys been working on getting steering out most of the night, havnt got enough lifting power to remove the cab over the column, so I unbolted the steering box from the chassis and the steering arms from the pitman arm... all should be good to go now.. But while hitting the pitman arm with hammers a plug, that almost looks like a welsh plug come off the front end of the steering box and and lost all its fluid? and the shaft inside that whole seems off centre and moves freely ( not sure if that's how it is normally) and yesterday before I came on here (rushing sadly) i unbolted the 3 bolts at the bottom on the column on the top of the box and tried to slide the shaft out, but some of the split metal gaskets came out and broke a big O-ring!! So far it is not going good but I can think about all that when im ready to put it together!! and also yesterday pulled off the top thing with 3 bolts on the top of the box. but that seemed to go back together easy enough.. What should I do? Look for another box or try put this one back together!