ggzilla 1,742 Report post Posted August 17, 2009 (edited) Did you know Pull-A-Part is open till 7pm, seven days a week!!! Jackpot today at Arlington, WA: * four 720 pickup * three Datsun 210 * one Datsun B-210 * two 280Z * one 280ZX * one 200SX (S110 coupe) * one Datsun 1600 Roadster Datsun 280Z with factory tach still in it Datsun B210 is getting picked over quite nicely. 1979 Datsun 210 Coupe, 1979 Datsun 210 2-dr sedan, 1980 Datsun 210 Coupe 720 pickups 1-4 One has aftermarket steering wheel and factory gauges! Datsun 1600 Roadster 200SX Coupe is being neglected, almost no parts taken since last month Edited August 17, 2009 by ggzilla 1 Quote Share this post Link to post
motavated 76 Report post Posted August 17, 2009 I found these two here 17800 S Vermont Ave Gardena, CA 90248 (310) 327-0400 A Toyota Corona. A 620 and some z that are not pictured... Quote Share this post Link to post
DRIVEN 405 Report post Posted August 21, 2009 North Portland LKQ (Columbia): I was there for GM parts so I'm sure I missed some Datsuns -- This is an "at least" list: (1) 1200 coupe (1) 240z (1) 1981 280zx (1) 520 (1) 521 (1) 1976 620 (2) 720s Sorry, I always forget to bring a camera. Quote Share this post Link to post
stevensonDNL 12 Report post Posted August 23, 2009 ggzilla: I went to Pullapart Arlington Friday afternoon 8/14 and filled my ample pockets for my $1.00. Since there were no 620 pickups to get parts from, I took the front turn signal lenses from the green '79 210 and made them fit on my '77 620. There was also an '83 Nissan Pulsar (I bought one new in '83). From the pulsar I got the 5 speed gear shift knob, which I am now using in my truck. Fit right on the shift lever. I got the driver's side rear view mirror from one of the 720 pickups, it's now installed on the passenger side of my 620. I got a pai]r of console gauges from one of the 720's and lots of other misc. parts. I love going to Pullapart! Seeing your pics makes me feel like I'm there stuffing my pockets all over again! Thanks ggzilla! Dan Quote Share this post Link to post
moparvwfreak 76 Report post Posted August 23, 2009 2 kc 620s at lynnhood pap. a thrashed 79 and a beautiful 78. Quote Share this post Link to post
hoov100 13 Report post Posted September 1, 2009 if anyone needs anything let me know. like i said if anyone needs anything, just hit me up and I already claimed the air dam on the 280z and the series 1 center console and flasher switch. Quote Share this post Link to post
ggzilla 1,742 Report post Posted September 21, 2009 Sunday Sep 20, 2009 Lynnwood Pull A Part http://pullapartwa.com * blue 620 King Cab * Datsun 310 * some new 280ZX all the old cars 280Z and 200SX, Roadster are still there Arlington Pull A Part http://pullapartwa.com * some new 280ZX * 1 the 210s is gone * the B210 is marked with a check on the back glass * a new 720 All the previous cars are still there Quote Share this post Link to post
ggzilla 1,742 Report post Posted September 21, 2009 Imagine a nice rust-free B210 which arrived complete at Pull A Part a couple of months ago. Now no doors, hood, trunklid, not fenders no seats, no running gear. Cylinder head, transmission, rear end and front struts are all gone. And today it is sitting on four welded-wheel jackstands and someone cut the floor out of it! You can stand up inside the car! Quote Share this post Link to post
hoov100 13 Report post Posted September 21, 2009 Imagine a nice rust-free B210 which arrived complete at Pull A Part a couple of months ago. Now no doors, hood, trunklid, not fenders no seats, no running gear. Cylinder head, transmission, rear end and front struts are all gone. And today it is sitting on four welded-wheel jackstands and someone cut the floor out of it! You can stand up inside the car! lol, most datsuns around here are stripped and crushed, regardless of what they are, I can honestly say i have killed more rust free and strait 510's and z cars then i have killed any other brand of car. Quote Share this post Link to post
OpelWagenGT 22 Report post Posted September 21, 2009 Imagine a nice rust-free B210 which arrived complete at Pull A Part a couple of months ago. Now no doors, hood, trunklid, not fenders no seats, no running gear. Cylinder head, transmission, rear end and front struts are all gone. And today it is sitting on four welded-wheel jackstands and someone cut the floor out of it! You can stand up inside the car! Was it a green four door? if it was I believe I have the steerng wheel, door handles, window handles, rear shocks, front emblem, and some other goodie. :) Quote Share this post Link to post
ggzilla 1,742 Report post Posted September 22, 2009 (edited) It is this one: now missing the front floor and rocker panels just a big section cut out, everything between a and b pillars [picture Aug 16] Edited September 22, 2009 by ggzilla Quote Share this post Link to post
Nissan_Boy85 145 Report post Posted October 7, 2009 10/6/09 Found this at a junkyard that's right next to the LKQ on Columbia in Portland. Place is called A1 Light Truck Parts. Can't miss it, they got a bright yellow Ranger on a pole. Now I can go get something you need if your willing to pay for the part and a small delivery fee. Hit up the PM for anything. I already pocketed the near perfect 4-speed knob though. :D Quote Share this post Link to post
DRIVEN 405 Report post Posted October 7, 2009 As usual - forgot my camera. -1976 280z auto -1981 280zx N/A still very complete including iron cross wheels, 5-speed and struts. Missing shifter and master cylinder. -1981 280zx Turbo also pretty complete. Auto trans. Missing injectors and rocker cover. Didn't see anything else. Yard was 50% clunkers. What a waste:(. Quote Share this post Link to post
goes211 10 Report post Posted October 9, 2009 Imagine a nice rust-free B210 which arrived complete at Pull A Part a couple of months ago. Now no doors, hood, trunklid, not fenders no seats, no running gear. Cylinder head, transmission, rear end and front struts are all gone. And today it is sitting on four welded-wheel jackstands and someone cut the floor out of it! You can stand up inside the car! That was me. I took the front clip and both doors too! Quote Share this post Link to post
Bleach 991 Report post Posted October 9, 2009 I took the engine to swap into my turbo Z Quote Share this post Link to post
ggzilla 1,742 Report post Posted October 17, 2009 Bleach your turbo Z may not be much faster with B210 engine, but it should be very reliable :-) Quote Share this post Link to post
Bleach 991 Report post Posted October 17, 2009 I'm trying to get the Nifty Fifty z-car Quote Share this post Link to post
OpelWagenGT 22 Report post Posted October 19, 2009 curently in the lynnwood Pull-A-Part there is just one blue king Cab with now much to it. Quote Share this post Link to post
jesusno2 574 Report post Posted October 19, 2009 if you portland fellas or washinton guys find a 280zx i really need lug nuts and center caps for a set of swazi turbo wheels! very badly. Quote Share this post Link to post
motavated 76 Report post Posted December 18, 2009 There is a 720 4x4 at the Wilmington ECOLOGY! It has some aftermarker front control arms???!??!? They are tube like raising the truck??? Other than that a earliy toyota celica and a 240sx with a dual cam auto and some Z'ssss... Peace!!! Seen 69wagon there???? Quote Share this post Link to post
motavated 76 Report post Posted December 28, 2009 I went to the santa fe spring ecology in California and the only thing that i could find Datsun related what that there were some early maximas one was a wagon. 2 Mercedes benzes with those yellow fogs... and alot of 720's. That is it... OH! And that person who was hidding there datsun part stashed in the Bus... I found them! I took some shit home with me... Thanks! I even found your distributor. Quote Share this post Link to post
Moisabamf 8 Report post Posted December 28, 2009 I went to the santa fe spring ecology in California and the only thing that i could find Datsun related what that there were some early maximas one was a wagon. 2 Mercedes benzes with those yellow fogs... and alot of 720's. That is it... OH! And that person who was hidding there datsun part stashed in the Bus... I found them! I took some shit home with me... Thanks! I even found your distributor. that was pretty dick! how would you have felt if you had hidden pars and somebody took them? no love for your datsun brothers? if i see hidden parts, i leave them! hell sometimes ill toss some more stuff up there Quote Share this post Link to post
motavated 76 Report post Posted December 28, 2009 Geez man I was just kidding man. There was a messed up 620 bumper there and a apron. also a dizzy for a 6 cylinder datsun. Still there... But seriously why hide it? Its not like they are going to have a half off sale soon. Maybe it was no cash? But if you have no cash then you shouldn't be at the yard looking for stuff I guess... Quote Share this post Link to post
JDM510 206 Report post Posted December 28, 2009 i dont under stand why all you people are sitting here talking about pocketing things in these yards you know this is a public forum and any one can veiw this stuff... that being said giving peple tips to what your doing maybe they will start weight check at the door or something stupid like that i know every one dose it but come on it dose not make you cooler talking about filling your pockets online Quote Share this post Link to post
zerow 206 Report post Posted December 28, 2009 ...But if you have no cash then you shouldn't be at the yard looking for stuff I guess... Murphy's Law of Wrecking Yard Wisdom: You will never find the parts you are looking for/want when you have money. However, you will find everything on your wish list (in pairs) when you are broke. Spoken from experience (I should have put that 3.70 Subi LSD in my pocket or something...:) Quote Share this post Link to post