Jump to content

"Theft-Proof" Screw Heads On Ignition Tumbler Ass'y


TheEddie

Recommended Posts

Posted

I now proudly own (or rather, am "Caretaker For") a 1981 Datsun (NOT Nissan) 720 Pickup.

 

The keys are jammed-up in the ignition; locksmiths in two cities either didn't want the job or couldn't handle it.

 

Well.

 

I went ahead and ordered a replacement ignition switch offa everybody's favorite AP Store...Amazon...and today tried to take apart the existing switch, which includes a bolted collar that wraps around the steering column.

 

Those bolts have some sort of weird theft-proof head, which obviously take an equally weird socket in combination with an impact-socket wrench; I have the wrench but not the socket.  

 

Anybody got a socket P/N, source, work-around, etc.?

 

Any yeah, I see the Phillips-head; It's the other one...😱

20261010_123418.jpg

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted

The screwdriver end of the screw is designed to snap off once tightened up leaving nothing to grip to remove them. Like Alexander and the Gordian knot I removed them the easy way...

 

2l9O8xi.jpg

 

hjGNUnA.jpg

 

wKtlPEA.jpg

 

No harm in re-using them. 

Posted

(Sigh)  That"s what i fingered would happen and I suppose it's inevitalble, but...

 

...in the late 60's-early '70's, "head shops" used to sell cool posters, and one of 'em was this:  A weeny lil mouse giving the finger to a huge screaming eagle that was swoopin' down to eat him; "One Last Futile Gesture".

 

So I am going to try it with what I have hopes is the correct tool (for the first time in my life); then whack away with hack saw, drill bit, cuss words, more cuss words, a BFH...

 

Eddie

Posted

I would not call that anti-theft, if one wants to steal your 720 just hit the area of the key with a hammer, plug in your own key assembly, start it and drive away.

 

I believe I used a punch at an angle to loosen the screw, then used small needle nose pliers to get it out far enough to spin with my fingers, mine were not very tight.

Posted
On 10/10/2026 at 1:59 PM, TheEddie said:

I now proudly own (or rather, am "Caretaker For") a 1981 Datsun (NOT Nissan) 720 Pickup.

 

The keys are jammed-up in the ignition; locksmiths in two cities either didn't want the job or couldn't handle it.

 

Well.

 

I went ahead and ordered a replacement ignition switch offa everybody's favorite AP Store...Amazon...and today tried to take apart the existing switch, which includes a bolted collar that wraps around the steering column.

 

Those bolts have some sort of weird theft-proof head, which obviously take an equally weird socket in combination with an impact-socket wrench; I have the wrench but not the socket.  

 

Anybody got a socket P/N, source, work-around, etc.?

 

Any yeah, I see the Phillips-head; It's the other one...😱

20261010_123418.jpg

I can't believe this gave you old farts any trouble!! I had the easiest time drilling into the screws until the bit dug in a little, then reversed the drill and they came out without even using an extractor. There's nothing serious about the threads, they'd remove with hand tools if they just had screw heads. Drilling them and then using an extractor would make their removal a certainty rather than a stroke of great luck like I had with them.

 

I got an assembly with the whole collar included, replete with a full set of normal Philips screws. The steering lock tab on my old one was sheared off. I like the key that the new set came with, just sucks that I couldn't have matching door locks.

Posted
On 10/16/2026 at 11:04 AM, TinKanTosser said:

I can't believe this gave you old farts any trouble!! I had the easiest time drilling into the screws until the bit dug in a little, then reversed the drill and they came out without even using an extractor. There's nothing serious about the threads, they'd remove with hand tools if they just had screw heads. Drilling them and then using an extractor would make their removal a certainty rather than a stroke of great luck like I had with them.

 

I got an assembly with the whole collar included, replete with a full set of normal Philips screws. The steering lock tab on my old one was sheared off. I like the key that the new set came with, just sucks that I couldn't have matching door locks.

Didn't give "we" (not "us") 'ol' farts" any problems here; the problems were 1), Stoopidity; 2), Budweiser; 3), Retiredness a/k/a "Manana", 4), Excuses, 5), Etc.

 

I bashed the whole mess out in a Saturday morning.  As you write, those screws were not in there very tightly and thus they backed out fairly easily.

 

Bein' me, I knew better than to whack away with a hacksaw as The Mike proposed; a better man than I.  I woulda done some serious unintentional damage to the steering column, engine block, the Sands Point Nuclear Reactor and the Mid-East Peace Process. 

 

Look at the top pic--see those three (3) "dot" indentions?  Pull the steering wheel and turn signal cover so you can get a better shot at those screws...then...

 

With a dimple chisel certered on those "dots" tap away using a light-weight ball-pein BFH.  Took 'bout an hour.  Datsun anti-theft technology at work.

 

Eddie

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.