Valvebounce Posted August 29, 2021 Report Share Posted August 29, 2021 Hey team, one quick question. Does the loom which feeds the rear of the car route through the centre hole, or the one to the side in the picture? Obviously mine is RHD. My dash and loom are out of the car atm, so I cant see where the in car loom want to attach to as a reference. Quote Link to comment
Valvebounce Posted August 29, 2021 Author Report Share Posted August 29, 2021 Under the car it appears as though it reach through either side. Quote Link to comment
RustedRails Posted August 29, 2021 Report Share Posted August 29, 2021 Looks like my LHD went through the middle one on the passenger side. 1 Quote Link to comment
Valvebounce Posted August 29, 2021 Author Report Share Posted August 29, 2021 (edited) Thank you @RustedRails! I guess as they were originally designed to be rhd, they must not have re-routed it for the USDM market. I'm getting to the pointy end of a long build. And it's been so long, I couldnt remember which hole is had been in. Edited August 29, 2021 by Valvebounce 1 Quote Link to comment
RustedRails Posted August 30, 2021 Report Share Posted August 30, 2021 I know what you mean. I'm still in the "early stages" where the car is pulled apart so it will be a while but I'll remember this conversation about not remembering old stuff for sure haha. I wonder if it's just normally like that since the engine harness goes through that side of the firewall? I'm thinking it's a straighter shot from there vs running it across the trans tunnel. I have no idea lol. Quote Link to comment
Valvebounce Posted September 2, 2021 Author Report Share Posted September 2, 2021 LHD must have a different dash loom, as the instrument cluster is on the opposite side. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.