nicklp Posted June 13, 2021 Report Share Posted June 13, 2021 I had this first pic. held on by one screw: So I made this: the clamp and mirror are from a generic British car mirror. Quote Link to comment
nicklp Posted June 13, 2021 Author Report Share Posted June 13, 2021 And parts: (had to figure out how to make pictures smaller) Fun facts: the mirror is held on by three metic 4x .75 machine screws, which are not available because standard is 4x .70. I took brass American #10x32 screws and forced them through a 4x .75 die, so that works ok. If you google the part numbers from that parts book page, you get modern Nissan mirrors; the part number prefixes are the same 60 years later! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.