edekalil Posted December 6, 2020 Report Share Posted December 6, 2020 Hate to ask I had this somewhere, Trying to search but having trouble finding . Quote Link to comment
datzenmike Posted December 6, 2020 Report Share Posted December 6, 2020 Not a problem, always check first 0.008" and 0.010" for intake and exhaust although I prefer a hot setting of 0.010" and 0.012". A cold setting assumes everything is set at 60F and expands to operating temperature. Don't do in the middle of the winter or summer. 1 Quote Link to comment
edekalil Posted December 6, 2020 Author Report Share Posted December 6, 2020 Thank you again Mike for the info, now to take a break and then adjust the lash then do the last few things before giving her a crank. Quote Link to comment
datzenmike Posted December 6, 2020 Report Share Posted December 6, 2020 Oh cold setting definitely if needed just to get started. I might check it once warmed up to confirm the hot settings. 1 Quote Link to comment
edekalil Posted December 10, 2020 Author Report Share Posted December 10, 2020 Will do. Quote Link to comment
banzai510(hainz) Posted December 15, 2020 Report Share Posted December 15, 2020 I do .006 and .008 cold myself. 1 Quote Link to comment
datzenmike Posted December 15, 2020 Report Share Posted December 15, 2020 That will run quieter. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.