Jump to content
PercyTheAce

B-210 Transmission identification

Recommended Posts

So I’ve got a 76 b210 with a 4 speed in it. I’ve got to replace the clutch and I’m finding two different clutch kits, one for an 18 spline input shaft and one for a 24 spline input shaft. Is there any way to tell which one I have before I tear the tranny out of the car? All I’ve been able to find info wise is that it seems that it’s either a 60a series or 60L series transmission but I can’t find spline counts for either.

Share this post


Link to post

You want the 18 spline clutch. The 24 spline is for the '76 and up optional 63A 5 speed.

 

The clutch doesn't care what series transmission is behind it as long as the spline is right. I have your 4 speed listed as a 60 series but the later '79 210 had a 60L 5 speed and the '80 and on a 60A 5 speed.  

 

The replacement clutch disc for a '76 is  Nissan part 30100-H5200 the pressure plate is 30210-N1600. The clutch assembly is 180cm (7.09") diameter

 

ALWAYS replace the release bearing with a new one.

As they are only $4, replace the pilot bushing in the end of the crankshaft while the pressure plate is off.

 

You'll have to look at the flywheel surface. Hopefully smooth, no gouges. A block of wood wrapped with sand paper and circular motions will 'break the glaze' and also smooth any small imperfections. If not sure have it milled to true it up.

 

 

  • Like 1

Share this post


Link to post

Thanks for all the info 🙂 I’m gonna get the parts on order here soon and hopefully have it wrapped up in the next couple weeks.

Share this post


Link to post

You can use those part numbers to cross reference another maker.

Share this post


Link to post

I’ve used luk on several vehicles with great results.

  • Like 1

Share this post


Link to post
17 hours ago, Draker said:

I’ve used luk on several vehicles with great results.

Me too, been very happy with them.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.