Jump to content

Help identifying 5 lug conversion


Alg86

Recommended Posts

This is my first Datsun. It’s a 71 510. The guy I picked it up from didn’t know much about about. Trying to figure what the 5 lug and brake conversion came from.  Need to figure out if this is the same or different then the factory offset. I put a s2000 wheel that was in the shop. It hits the front coilover and sticks out an inch or so past the fender. Can anyone help identify the parts?

 

https://www.dropbox.com/s/r859p9q7ldl9lt8/Photo Nov 15%2C 12 10 31 PM.jpg?dl=0

https://www.dropbox.com/s/a9ey3yhimdv7ptc/Photo Nov 15%2C 12 12 54 PM.jpg?dl=0

 

Link to post
  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Always check you links after posting to be sure they work.

 

What car or truck do you have? and put it in your profile so it can be referred to without asking.

 

If it hits the coil over AND sticks out past the fender no amount of off set change will fix this.

 

The Z31 300zx turbo '-84-'89 came with 5 lug.

All later Z32 300zx were 5 bolt.

The Feb '94 and up S14 240sx had 5 lug.

 

 

 

 

Link to post
2 hours ago, Alg86 said:

This is my first Datsun. It’s a 71 510. The guy I picked it up from didn’t know much about about. Trying to figure what the 5 lug and brake conversion came from.  Need to figure out if this is the same or different then the factory offset. I put a s2000 wheel that was in the shop. It hits the front coilover and sticks out an inch or so past the fender. Can anyone help identify the parts?

 

https://www.dropbox.com/s/r859p9q7ldl9lt8/Photo Nov 15%2C 12 10 31 PM.jpg?dl=0

https://www.dropbox.com/s/a9ey3yhimdv7ptc/Photo Nov 15%2C 12 12 54 PM.jpg?dl=0

 

71 Datsun 510 

Link to post

The brake calipers both look like front and rear from a Z32. I think there may also be similar calipers that game on the Nissan GTR but that would be far more rare.

 

The rear hubs are re-drilled so it is probably just 5x4.5

The front looks OEM. I'm not sure, but I think the late Z31 turbo looks like that (strut assembly) and can also bolt up the Z32 caliper.

Late Z31 would be 1987-89 300ZX

 

If that is the case, then I suppose the rotor set that fits would be 1988 300ZX turbo.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.