Jump to content

D21 2wd front hubs


Valvebounce

Recommended Posts

Hey team,

One quick question,

Does anyone know if the d21 hubs from a mid 80s four cylinder 2wd D21 (with 250mm vented rotors, and single pot calipers) are the same as the hubs from an early 90's VG30e 2wd D21 with 280mm vented rotors with two pot (inboard pots) calipers?

 

I've rebuilt my 250mm brakes, but after I increase the horsepower I might need to upgrade the stoppers. I can get rotors/pads/calipers easily enough. But V6 hubs would be very hard to find where I am.

Link to post
  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

On 10/22/2020 at 8:56 AM, Stinky said:

Look at rockauto and cross.refernce the PNs

That wont tell me if the hubs are the same.  If I upgrade them, I'll buy rotors, calipers, and pads off rock auto. But if the hubs arent the same I'd be screwed. 

Link to post
  • 2 weeks later...

I installed 1996 pathfinder front rotors and calipers on my 1986 720.  It took only a little modification.  You can look at my thread "lockleafs 720 shenanigans" for everything that was required.

 

So it should work fine on a d21.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.