grannyknot Posted July 30, 2020 Report Share Posted July 30, 2020 (edited) The lower seal on the pinion shaft of my steering box was shot so I tore it all down, measured and found the exact seals at https://www.avxseals.com/ Hope this helps someone out. Does anyone know what weight of gear oil I should use in the box? Edited July 30, 2020 by grannyknot 1 Quote Link to comment
edekalil Posted August 2, 2020 Report Share Posted August 2, 2020 (edited) I'm not sure but I would think gear oil like in the rear end or trans, I may be wrong but I would think Mike will chime in here soon with the correct answer. And thanks for the info on the seal by chance what's the part number on it. Edited August 2, 2020 by edekalil Quote Link to comment
DaBlist Posted August 2, 2020 Report Share Posted August 2, 2020 (edited) I use Champion "00" Manual Steering Box Grease Stays inside better than gear oil . Edited August 2, 2020 by DaBlist 1 Quote Link to comment
grannyknot Posted August 2, 2020 Author Report Share Posted August 2, 2020 7 hours ago, edekalil said: And thanks for the info on the seal by chance what's the part number on it. The part # is the dimensions, 24mm x 35mm x 7mm and 18mm x 31mm x 7mm 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.