Jump to content
Sign in to follow this  
Richgearhead

strut identification

Recommended Posts

I'll send a picture of the insert thanks again you guys for still trying to help me through searching for days I finality found the part# for the seal kit but as I'm sure every one knows its not available anywhere.  

Share this post


Link to post

Well I have done weeks of searching for an insert, nothing I found is short enough for my set up, I bought two inserts for my tubes but now I need a used tube so that I can extend my tube length fit my set up soooo  does anyone have a used tube that is 2" id that I can buy?  I'll need 8" of tube for each strut, thanks again for those who have given me input for my problem.

 

Richard 

Share this post


Link to post

All Datsun struts are 2" OD. Try scrap metal for 2" ID pipe.

Share this post


Link to post

I might of posted  my response in the wrong forum after weeks of looking for a short insert not to be found, so does anyone have any strut tubes with 2" ID that I can buy I need at least 8 inches to fix my problem.  Thanks again for all who helped me with my problem.

Share this post


Link to post

Go to scrap metal or recycling yard. Tell them what you need and they'll cut you some.  Datsun strut tubes are 2" OUTER diameter and won't work

Share this post


Link to post

You have 14 posts in this thread and 18 replies, 10 of those were mine. Are you not seeing the replies???

 

On 12/28/2019 at 10:50 AM, datzenmike said:

All Datsun struts are 2" OD. Try scrap metal for 2" ID pipe.

 

20 hours ago, datzenmike said:

Go to scrap metal or recycling yard. Tell them what you need and they'll cut you some.  Datsun strut tubes are 2" OUTER diameter and won't work

 

Datsun struts are 2 inch outer diameter. No one is going to cut up scrap struts and send them. Too much bother, too much shipping and wrong size.

 

Go to a scrap metal depot and look around for some 2 inch inner diameter pipe and have them cut you a couple of pieces to the size you want.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.