Richgearhead Posted December 5, 2019 Author Report Share Posted December 5, 2019 I'll send a picture of the insert thanks again you guys for still trying to help me through searching for days I finality found the part# for the seal kit but as I'm sure every one knows its not available anywhere. Quote Link to comment
datzenmike Posted December 5, 2019 Report Share Posted December 5, 2019 So what was it? Quote Link to comment
Richgearhead Posted December 28, 2019 Author Report Share Posted December 28, 2019 Well I have done weeks of searching for an insert, nothing I found is short enough for my set up, I bought two inserts for my tubes but now I need a used tube so that I can extend my tube length fit my set up soooo does anyone have a used tube that is 2" id that I can buy? I'll need 8" of tube for each strut, thanks again for those who have given me input for my problem. Richard Quote Link to comment
datzenmike Posted December 28, 2019 Report Share Posted December 28, 2019 All Datsun struts are 2" OD. Try scrap metal for 2" ID pipe. Quote Link to comment
Richgearhead Posted December 29, 2019 Author Report Share Posted December 29, 2019 I might of posted my response in the wrong forum after weeks of looking for a short insert not to be found, so does anyone have any strut tubes with 2" ID that I can buy I need at least 8 inches to fix my problem. Thanks again for all who helped me with my problem. Quote Link to comment
datzenmike Posted December 30, 2019 Report Share Posted December 30, 2019 Go to scrap metal or recycling yard. Tell them what you need and they'll cut you some. Datsun strut tubes are 2" OUTER diameter and won't work Quote Link to comment
Richgearhead Posted December 30, 2019 Author Report Share Posted December 30, 2019 I hope this works seems my post isn't being excepted, does anyone have a used strut tube 2" ID by at least 8" long that I might buy? Quote Link to comment
datzenmike Posted December 30, 2019 Report Share Posted December 30, 2019 You have 14 posts in this thread and 18 replies, 10 of those were mine. Are you not seeing the replies??? On 12/28/2019 at 10:50 AM, datzenmike said: All Datsun struts are 2" OD. Try scrap metal for 2" ID pipe. 20 hours ago, datzenmike said: Go to scrap metal or recycling yard. Tell them what you need and they'll cut you some. Datsun strut tubes are 2" OUTER diameter and won't work Datsun struts are 2 inch outer diameter. No one is going to cut up scrap struts and send them. Too much bother, too much shipping and wrong size. Go to a scrap metal depot and look around for some 2 inch inner diameter pipe and have them cut you a couple of pieces to the size you want. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.