PapaJohnsCollege Posted September 14, 2019 Report Share Posted September 14, 2019 I just did the first mod to my 620 and noticed that the upper outer control arm bushing were really messed up, luckily the guy that i bought the truck from had given me some but i was unable to get the bolt out to change them. I was wondering if there was a trick to it and if anyone knew a site or a listing on ebay for replacement bolts. Thanks -PapaJohn 1 Quote Link to comment
PapaJohnsCollege Posted September 14, 2019 Author Report Share Posted September 14, 2019 Never mind Im just going to cut off the head of the bolt, I thought that the bolts were weird but after looking closer they are not 1 Quote Link to comment
wayno Posted September 14, 2019 Report Share Posted September 14, 2019 They get rusted in there and you have to cut them out and put all new parts in(bolt and bushings). 1 Quote Link to comment
banzai510(hainz) Posted September 16, 2019 Report Share Posted September 16, 2019 is this the the bolt for the upper bushingbushing? I jack up the drum to relieve the tension on the bolt, get PB BLASTER and then put the nut on slightly and pound it out then use a rachet to turn the otherside to get the long bolt out 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.