DeadpoolD21 Posted August 29, 2019 Report Share Posted August 29, 2019 This is my first car and I have no clue what I'm doing with wheels. I'm wanting to do a 3in lower and add 3.5in fender flares and was wondering what size and offset wheel I could fit and it look good, like fill the fender, without any rubbing. Quote Link to comment
bilzbobaggins Posted August 30, 2019 Report Share Posted August 30, 2019 I "think" a lot of folk slamming the 2wd trucks like to run the 4wd bed and front fenders to gain more clearance. As far as wheels, no clue, but I know I have seen lots with the titan wheels on them. Quote Link to comment
]2eDeYe Posted August 30, 2019 Report Share Posted August 30, 2019 https://tiresize.com/wheel-offset-calculator/ Best bet is to start measuring your current setup and then use the above site to see what you can get to fit. Quote Link to comment
datzenmike Posted August 30, 2019 Report Share Posted August 30, 2019 Make the wheels and tires fit the truck.... not the truck fit the wheels and tires. Flares are for those who can''t do the math. 😄 Quote Link to comment
Quickshift Posted August 31, 2019 Report Share Posted August 31, 2019 The 4wd and pathfinder front fenders are wider than the 2wd ones but the 4wd bed is the same as the 2wd one. Most people cut up 4wd fenders to flare the bed or make their own out of fiberglass. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.