Jump to content
Sign in to follow this  
GT2

GT3 Road Race Chassis Rebuild, S14

Recommended Posts

I'm sidelining the Ratson Rod for a while so I can concentrate on the Road race car.

Its a S14, VG powered Tube frame car.

 

 

 

 

 

 

Share this post


Link to post

Rear axle rebuild

 

Share this post


Link to post

Any pics or video of the car before you took it apart for the rebuild?

 

What were the specs on your VG30?

Share this post


Link to post

Sorry no pics, The engine I have now is a stock test engine ( with headers and race wet sump pan).

I wont be building a race engine until the car is done.

Share this post


Link to post

Nice. Do you know where it came from? I spent a lot of time with Nasport and SCCA GT3/GT4 back in the 90's.

 

Recently just found a ton of pics too. I think these are from Seattle.

 

2010-01-20-1915-33_edited_zps665yyaut.jp

 

nasport_edited_zpswb0tmgbv.jpg

Share this post


Link to post

I too spent a little time around the nasport cars back in the day!

Most of the stuff I've been collecting or was given to me.

The body was a spare I bought from Mac Russel.

Share this post


Link to post

More rear axle assembly.

 

Share this post


Link to post

Do you have pics of the bodywork? Doug Barnhold built the bodies for Nissan back then. I wonder if it is one of those.

 

I remember Mac Russell's Alfa GTV, and I thought I remember him with a Mazda.

Share this post


Link to post
9 hours ago, Stoffregen Motorsports said:

Do you have pics of the bodywork? Doug Barnhold built the bodies for Nissan back then. I wonder if it is one of those.

 

I remember Mac Russell's Alfa GTV, and I thought I remember him with a Mazda.

Yes it is a Doug built body ( may he rest in peace). when he passed away we went and picked up the molds, their in Portland now.

Mac never had a mazda that I know of, only the alfa and the 240, were you at rebelos when they built his engine?

Share this post


Link to post

That's it. I do remember writing his name on a build sheet, so yes, I was still at Rebello's then.

 

Doug Barnhold was a massive hoarder of cars and parts. I once had the opportunity to visit him at his place in Fontana (before the speedway was built). He had bits and pieces from some of the most famous Datsun/Nissan race cars spread all over his chicken farm. I bought a pair of Solex 44's mounted on a BRE manifold that were actually from one of the BRE cars. He also had a one off BRE built heat exchanger, which he would not sell me. In one of his chicken coops, he had a 300zx "Corvette Killer", which was built by Nissan Motorsports as a lightweight street car. It was supposed to have been crushed, but Frank Honsowetz snuck it out the back door. I also remember seeing  CP 240Z hidden on one of the barns, but didn't pay much attention, as back then, it was just an old race car.

 

He was quite a cool dude.

Share this post


Link to post

Yeah, he had some cool nissan stories and memories.

We spent the day there exploring all the hidden treasures!

Never gonna find that kind of stuff again!

He is missed.

  • Like 1

Share this post


Link to post

Your rear calipers need flipped side to side, or the crossover tubes and bleeders switched top to bottom if possible. You have the bleeders pointing down. It will be very hard to remove air from the system.

Share this post


Link to post

Good catch on the bleeders.

 

One other thing, I would use anti-seize on everything. Not on the threads per se, but on the bolt shanks and on the heim misalingment bushings and sleeves. Those lone blots on the lower shock mounts are a good example of where anti seize could be used on the shank of the bolt. Keep it from rusting into place over time.

 

 

Share this post


Link to post

I was wondering if anyone would catch that. I realized it when I did the other side, and switched them after I did the video.

Good point on the long shank bolts, I actually had one of the lower shock bolts come out real hard on another car! 

Thanks.

  • Like 1

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.