]2eDeYe Posted March 12, 2019 Report Share Posted March 12, 2019 I have seen this little car parked off Smokey Point Blvd for a while. First it was there and not there like any daily. Then one day it was parked in a different spot and sat for a while, a while later a tarp covered it and there it sat. I had got to missing The Celica and Shonuff was pestering me about getting another thrasher. I decided to see what the story was on this one. Story goes, about 30 yrs ago a couple immigrate to the US, they get this car as their first car. Kids grow up and learn to drive in it and then the daughter had a bit of a kerfuffle in it. Perfect base for our purposes. I purchased it March 2018 for probably too much lol. So meet The Beercan, or Sunny the Donut Machine. 😄 Merely a flesh wound. Not a bad little runner :) I drove the thing to Nuffs work and he drove it the rest of the way out to his place. Surprisingly it drove straight really straight. Fucking thing vibrates like crazy though as the output on the trans and pinion are toast. So there it sat until this weekend (the snow finally melted) Used a 411 wheel to drive it out, the original wheel was a bit warped. Time for some entertainment value. Our puller for the day Door open, much success. It also closes lol. Anyone interested in some interior pieces? The seats are trash unfortunatley We were able to pull the side out far enough to stop the wheel from rubbing. CJ approved. Already drifting lol Lets go do some testing, does burnouts and still vibrates lol. Little bit of a trail test. I already located a door and a possibly a quarter panel but I think I will wait for a straighter one of those. Some interesting stuff in that yard. Weird hooks on this re-skinned gate. If anyone is interested in the A14 let me know. I have other plans for this thing :) Also Shonuff picked up a cheap Celica that will be built to thrash as well. I forgot to take pics of them parked together, but it is in the background in one of those pics. The Celica - RIP to the OG. 4 Quote Link to comment
]2eDeYe Posted April 5, 2019 Author Report Share Posted April 5, 2019 Found the wheels for this one. I have a set of almost new tiires to go with them. In case anyone was wondering where this was going. 1 Quote Link to comment
bananahamuck Posted April 5, 2019 Report Share Posted April 5, 2019 (edited) 16 minutes ago, Draker said: 4 or 5 speed? Knob only has 4 numbers .. zoomed in on the one oic. . Edited April 5, 2019 by bananahamuck Quote Link to comment
bananahamuck Posted April 5, 2019 Report Share Posted April 5, 2019 (edited) It's a good start ,, and price,, is really a thing you have to over look any more.. Times they have-a changed.. You should think of getting it going enough to make the Capt Testicles,,, it's kinda a secret,, but a few of us are leaning towards a ,,, wobble that fucker in, hooty-fest .. i haven't even went and licenced the crapload i'm going to try and get there in... Yeah it's only 10 miles and we are bringing ropes just in case.. lol Fats "new" rig that he's driving , .lol Edited April 5, 2019 by bananahamuck 2 Quote Link to comment
]2eDeYe Posted April 5, 2019 Author Report Share Posted April 5, 2019 12 hours ago, Draker said: 4 or 5 speed? 4-speed, but it is a bit of a mess at the output end. Most of the parts pulled from this are going into Daves pumpkin, but not all. 12 hours ago, bananahamuck said: It's a good start ,, and price,, is really a thing you have to over look any more.. Times they have-a changed.. You should think of getting it going enough to make the Capt Testicles,,, it's kinda a secret,, but a few of us are leaning towards a ,,, wobble that fucker in, hooty-fest .. i haven't even went and licenced the crapload i'm going to try and get there in... Yeah it's only 10 miles and we are bringing ropes just in case.. lol Fats "new" rig that he's driving , .lol I paid $500.00, which I thought was more than fair. What is Capt Testicles? lol and that is a nice base for a long legged beast. Is it a runner? 1 Quote Link to comment
bananahamuck Posted April 6, 2019 Report Share Posted April 6, 2019 (edited) Define,,,,,, "runner" 😜 Jeremy Tuttle delivered to my house for $400. and something Apparently CT specialties powdercoating is like Arnold's on happy days .. To cheap to change the sign. Working on figuring out how to make a Facebook event thing-a-ma-bob to announce on there this time.. I mostly only do facebook if someone tells me to be on there ,, which is quite a bit lately ,, but still not that familiar with buttons Edited April 6, 2019 by bananahamuck 1 Quote Link to comment
bananahamuck Posted April 6, 2019 Report Share Posted April 6, 2019 I just noticed your rear license plate lights are exactly the same as the ones on Doodies 510.. . 1 Quote Link to comment
]2eDeYe Posted June 16, 2019 Author Report Share Posted June 16, 2019 Got to play with this one a bit yesterday. Learned interesting things about single cam KA's This is a 1990 D21 KA, rear sump. I am swapping on a front sump setup. Things never mentioned... or mentioned, but in the small print. Dip stick. Checking the oil will be fun as there is no holes machined for the front sump stick location. You can see the indention where it should be in the pics. Sump support. The front sump uses the girdle to mount the support bracket, I left it hanging for maximum ghetto. The 240sx motor has nice lower braces for the bellhousing, no provisions for this in the D21 block. The A series. Time to move some vehicles around... 1 Quote Link to comment
]2eDeYe Posted June 16, 2019 Author Report Share Posted June 16, 2019 Shop foreman barking orders The red celica here is going to be Nuffs gravel road machine. Matching set of wheels on the Stout 😄 Another buddy of ours picked up this thing. It will be getting the offroad treatment. B) Nuffs Celica ...and back to work Photo of the trans mount location for later reference. Comparison. KA trans mount face to rear mount C/L is approx 22" A Series trans mount face to rear mount C/L is approx 17-3/8" Need to make up 4-5/8" Good ol A series, this one is going to izzo for Pumkins 210. Ready for 2X powerup. It actually went in pretty easy. Main clarance issue at the moment is the O2 sensor/steering box and the EGR tube across the back of the motor. Mostly the EGR tube, will take car of that next time. Yes there is a motor under the entire D21 truck harness lol You can kinda barely make out the motor mount in this one. Motor needs to go back about 1" You can also see the tight space at the O2/steering box. A series overview. Some IRL photoshop. Will need some lift and sawsall. Finished work and loaded up to head home. A bit of BBQ and a view before heading home. 2 Quote Link to comment
]2eDeYe Posted March 17, 2020 Author Report Share Posted March 17, 2020 Got the tires mounted on the wheels and dropped them off with the car. Still trying to talk Nuff outta that rear axle on that yota 2wd right there lol. 1 Quote Link to comment
dukerollo Posted March 19, 2020 Report Share Posted March 19, 2020 (edited) I was thinking about this KA swap business the other day. The pan was the only real question mark for me. Glad to see a 240sx pan will bolt up with minimal issue. I’m interested to see where this goes. Edited March 19, 2020 by dukerollo 1 Quote Link to comment
]2eDeYe Posted March 19, 2020 Author Report Share Posted March 19, 2020 Probably best to start with a 240sx motor to keep the dipstick. 🙂 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.