Jump to content
Sign in to follow this  
Justin620datsun

Stalling- running issues

Recommended Posts

So I've been having issues with my truck stalling constantly. I tried adjusting the idle mixture as well as idle speed it helped for about a day. It bogs down and shudders when I'm driving, or slowing down to a stop. I'm thinking of rebuilding the carb. Is there a certain kit I should get? Also any good links for cleaning the gas tank? 

Share this post


Link to post

Rev it up and then put a rag over the carb to suck the dirt thru the jets(I was told this might work)

carb clean the shit out of it

timming? adjusted?

 

weber carb time!!!!

 

cut open filter and look for debris

Share this post


Link to post

For a good idle you need a good strong intake vacuum. Bad timing and over tight valve lash will destroy any idle. So check those first or second. Make sure timing and valve lash are good and move on.

 

Carburetor.

Remove the idle mix screw (count the turns so it goes back the same) and take the idle cut solenoid out carefully... it has a spring and loose pieces inside.

 

Use a can of carb spray with a straw and spray into the idle cut solenoid hole so it flushes out the idle mix screw hole. Now flush in reverse. Put the idle mix screw back in and spray the idle cut solenoid hole again to push any debris back through the carb. Replace the solenoid and check that when the ignition is turned on and off the solenoid makes a clicking sound. If no sound there may be a problem.

Share this post


Link to post

So I removed the idle cut solenoid and idle mixture screw and carb cleaned it. Seems to run way better. Took it for a drive and seems to drive much better. We will see in the morning how it goes. Thanks guys I will update tomorrow.  Also I'd love to put a weber on it but I dont want to spend all that money just yet. 

Share this post


Link to post

I had this happen to a Weber carb I cleaned out the idle jet then bam it went bad again.  My fuel filter was full or rust and dirt.

put new one on then was good after another cleaning.

Share this post


Link to post

So I drove it to work and the issue is still there. I'm going to get the carb rebuilt and clean out the fuel lines and drain the tank to see what that looks like. Any tips on the electric fuel pump? I believe it is the faccet one. Would it be easier to remove the bed to access everything better? I'm just trying to make this thing daily drivable without worrying about it breaking down.  Also will be getting a timing light to see what a going on there. Needless to say I'm pretty frustrated with this thing. 

Edited by Justin620datsun

Share this post


Link to post

if fuel filter stays clean no need t bother with a tank(just my opinion)

rebuilding is a wiaste of time to me when a Weber is smplier to work on once on and most like this is worn out anyways. However the later L20 its hard to get at

Share this post


Link to post

You would only have an electric fuel pump if your '79 originally came equipped with an air conditioner, otherwise you have a mechanical pump on the front right (pass side) of the head

 

The electric fuel pump is located on the outside of the passenger side frame rail just forward of the rear leaf spring mount.

 

There is (or should be) a plastic fuel filter in line before the electric pump and a twist off bottom on the electric pump with a filter inside and a magnet on the cap. I believe there is an old VW bug filter that will fit it?

Share this post


Link to post

They're cheap and should be changed every 2 years.

 

Do not bother removing the gas tank. The 620 after '74 has a return line to the tank, so during engine running the gas is slowly but constantly being re circulated and filters out any crap in the tank.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.