Jump to content
dukerollo

L20b b310

Recommended Posts

Does anyone know of this being done anywhere? Does anyone have any pictures?

 

I’m sure I’m not breaking new ground.  I have finally got the engine and trans in at the same time, but it has required major surgery. I still don’t know if the hood will go back on. 

 

I can can see why Nissan stretched the nose on the Sunny Perfects, there are no room in these damn things. 

 

When it’s not 3:30 in the morning, I’ll update my build thread. This little tangent of the project has been a bit more than I bargained for....or I’m just tired and being bitchy....

Share this post


Link to post

Hi, I've put an L16 in my round light 79 b310 (b210 in USA) 

Yes the hood hit just where the cross brace sits in the underneath the bonnet. 

I used shorter engine mounts to drop it 10mm. Good luck trying to fit a L20 with stock carby. I used twin su carbs. 

 

What major surgery did you do? I only had to fit the pa10 pedal box for a hydraulic clutch and some relief on the gearbox cross member to fit the 5speed gear box . 

Share this post


Link to post

I moved the engine back because I couldn’t get the radiator in. Now the 280zx trans is too friendly with the tunnel, so I had to do some chopping. I am going to be using a KA head eventually which should give me hood clearance. 

 

Did you have room for a rad in the stock location, or did you modify the core support?

 

If you have any pics I would love to see them. 

 

 

Share this post


Link to post

I used a SR20 radiator that had the inlets and outlets on the correct sides. It's a twin core. 

Takes up the whole nose cone area between the chassis rails 

 

Sent you a message about the pictures. 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use.