Jump to content
Sign in to follow this  
deans510

Clutch Set Advice

Recommended Posts

I need advice on what would be a good non racing, street only clutch set for a 240mm Fidanza FW I'd like to use with my newly rebuilt Rebello KA24 engine and trans.

 

The KA24 engine and trans I'm replacing has a 225mm Fidanza FW clutch set.

 

Dean

gzentas510@outlook.com

Share this post


Link to post

A D21 Hardbody will fit and it's 240mm. So is the 280zx and 300zx. Try to find a set that includes the release bearing collar also.

Share this post


Link to post

Are you looking for brand recommendations?

 

Exedy is always good. Centerforce. ACT. Even LUK makes good clutches.

 

 

Spec if you have the money and a stepped flywheel.

Share this post


Link to post

I've installed a few luk clutches. Running one now.

 

Not sure what would work well for your setup. Centerforce would probably be a good performace clutch.

Share this post


Link to post

Well he did say 'non racing' street clutch. The 280zx/300zx clutch and PP is a hell of an upgrade for the 240sx using stock parts. These are not 'one size fits all' after market parts like shock absorbers. These are what the factory made for what it was used on. If it will contain a 280zx turbo it will hold a KA.

 

Nissan factory part pressure plate...

280zx turbo / 300zx.................... 30210-P9500 approx $90

 

Clutch disc....

280zx......................................... 30100-P9511 approx $120

300zx......................................... 30100-21P00

  • Like 1

Share this post


Link to post

Do you need to use the 240mm clutch and flywheel? I've always felt that it's a bit on the  overkill side. I wonder how much lighter a 225mm setup would be.

  • Like 1

Share this post


Link to post

I WOULD THINK A 225MM WITH A EXEDY STATE 1 WOULD BE ENOUGH CLAMPING 

 

impoortrp.com has these in the aftermarket section listed wit other clutchtes

 

but I guess 240 have better grabbing surface if doing burnouts. Fidanza I assume its aluminum FW already

  • Like 1

Share this post


Link to post

 

Do you need to use the 240mm clutch and flywheel? I've always felt that it's a bit on the overkill side. I wonder how much lighter a 225mm setup would be.

 

I need advice on what would be a good non racing, street only clutch set for a 240mm Fidanza FW I'd like to use with my newly rebuilt Rebello KA24 engine and trans.

 

The KA24 engine and trans I'm replacing has a 225mm Fidanza FW clutch set.

 

Dean

gzentas510@outlook.com

 

 I'm guessing the flywheel is already lighter than stock so a few more pounds won't hurt.  I'm also guessing the rebuilt engine puts out at least a strong stock HP 145-150?

  • Like 1

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use.