Jump to content
konig209

Simple painless engine wiring into any vehicle.

Recommended Posts

Is wiring a pain in the ass for you. Want to just have a harness done to the point where you wire in 5 wires and done. Well all the infor is in the pictures below itll have relays and fuses wired in easiest harness out there.

 

I dont make the harness'theyre done by a local shop who i help getting the word out. Many done around the u.s. already.

 

Also if you need your datsun fully rewired and youre near modesto ca. He can help.

  • Like 5

Share this post


Link to post

I just want a new 521 engine bay harness for an L.

 

Maybe with some modern upgrades built in.

 

 

 

 

Just saying.

  • Like 1

Share this post


Link to post

Oh...following as I think this will be a great DISCUSSION!!!

 

 

Don't ruin it, people.

  • Like 2

Share this post


Link to post

I just want a new 521 engine bay harness for an L.

 

Maybe with some modern upgrades built in.

 

 

 

 

Just saying.

I do that already just dont put it out there. I dont know if its just my truck or not but i strip and clean all the not needed shit super clean and simple. But the wiper motor only works in 1 speed and the heater blower dont work either. But then again idk if my heater blower and wiper motor are bad lol

 

Also i removed my heater out of my truck 100% deleted haha

  • Like 1

Share this post


Link to post

I don't have the luxury of not needing a heater.

 

 

 

Lol.

 

 

Many 521 owners would benefit greatly from a modern, new harness. Whether it be dash, engine, or body- yadidimean?

  • Like 1

Share this post


Link to post

I updated my own to the best i could fully tucked

  • Like 1

Share this post


Link to post

This is the kind of thing I'd love to do but living where everything must be shipped makes it a bad business venture for sure.

  • Like 1

Share this post


Link to post

He has recieved and shipped many. Hawaii, tennessee, florida, texas, 1 week to week 1/2 turn around.

  • Like 1

Share this post


Link to post

Right I Stoked I finally figured it out! I was wondering the best way to break in new piston rings and fresh bore.. also what oil is best to use??

 

 

I just want a new 521 engine bay harness for an L.

 

Maybe with some modern upgrades built in.

 

 

 

 

Just saying.

 

 

Oh...following as I think this will be a great DISCUSSION!!!

 

 

Don't ruin it, people.

 

Agreed, discussion only. Otherwise contact directly.

  • Like 1

Share this post


Link to post

looks just engine managment harness only< correct? for a KA/SR ect..

 

I thought there was a wiring shop. Wire specialties that does KA/SR harness already

 

 

Its Not rewire a whole car truck or wagoon.Thats to much to do to get correct

  • Like 1

Share this post


Link to post

looks just engine managment harness only< correct? for a KA/SR ect..

 

I thought there was a wiring shop. Wire specialties that does KA/SR harness already

 

 

Its Not rewire a whole car truck or wagoon.Thats to much to do to get correct

Yes just engine harness. W.s. doesnt offer ka
  • Like 1

Share this post


Link to post

Pricey to have zip ties.... :poke:

  • Like 1

Share this post


Link to post

What are the wires that you are wiring in and what do they go too? 

  • Like 1

Share this post


Link to post

Ground

12v constant

12v switched

Fuel pump

Starter injector prime

Aftermarket temp sensor "optional"

  • Like 1

Share this post


Link to post

You send in your existing wire harness, he modifies then sends it back?

  • Like 1

Share this post


Link to post

You send in your existing wire harness, he modifies then sends it back?

Yessir
  • Like 2

Share this post


Link to post
On 1/4/2018 at 12:37 AM, konig209 said:

Is wiring a pain in the ass for you. Want to just have a harness done to the point where you wire in 5 wires and done. Well all the infor is in the pictures below itll have relays and fuses wired in easiest harness out there.

 

I dont make the harness'theyre done by a local shop who i help getting the word out. Many done around the u.s. already.

 

Also if you need your datsun fully rewired and youre near modesto ca. He can help.

 

Anymore info. I’m curious. I have a 1983 720 Z24

Share this post


Link to post

Idk why the pics are gone ill upload em up again

 

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use.