az_rat210 Posted May 15, 2019 Report Share Posted May 15, 2019 Alright, since people seem to still be posting to this thread I might as well mention. If you bend up a 10mm box end to a 90 degree angle as seen in previous pictures, you can grind the outside circle of the box head down sufficiently to fit onto the 10mm nuts that hold the Hitachi down. The addition of using a magnet to magnetixe the mounting bolts and the nuts you are putting on is also helpful. Quote Link to comment
pdp8 Posted September 25, 2019 Report Share Posted September 25, 2019 From the Snap-on catalog, special wrenches S6013 and S6130. Special tools for removing carburettors on 4-cylinder Datsun engines. The 6013 is the earlier version for 12mm nuts and the 6130 is for the 10mm nuts. So, you guys arguing about the size were both right. https://www.collectingsnapon.com/catalogs/catalogs.php?loggedin=0&catalogPage=5455 https://www.collectingsnapon.com/catalogs/catalogs.php?loggedin=0&catalogPage=3150 1 Quote Link to comment
Wahinkpe69 Posted October 25, 2019 Report Share Posted October 25, 2019 With a 10mm (on my B210 Deluxe Wagon, anyway) wrench very carefully or curved needle-nosed pliers! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.