Jump to content
Kenmataya

vent window rubber compatibility

Recommended Posts

Hello all,

 

these 620 vent window rubber part numbers are:

 

LH  Part # : P411-5202
 
RH Part # : P411-5201
 
does anyone know if these will fit a 411?
 
Thanks,
Ken

 

Share this post


Link to post

will 521 vent rubber fit the 411?

 

Thanks,

Ken

 

will 521 vent rubber fit the 411?

 

Thanks,

Ken

 

No.  The 521 window is taller than the 410 or 411.  This makes the 521 vent rubber taller with a sharp upper corner, not a rounded upper corner like the 410 / 411 unit.

Share this post


Link to post

520 or 521 vent window rubber, sharp X-acto knife, rubber cement and the existing vent window [to hold everything in correct alignment] well lubricated to prevent cement sticking and you might have a functional seal.  The area around the window lock just might be very tricky.

Share this post


Link to post

520 or 521 vent window rubber, sharp X-acto knife, rubber cement and the existing vent window [to hold everything in correct alignment] well lubricated to prevent cement sticking and you might have a functional seal. The area around the window lock just might be very tricky.

Good thing 521 wing window seals grow on trees...

Share this post


Link to post

I have what well may be the only authentic replacement 411 right and left hand set of wing window rubber seals. In original Datsun parts sealed packages!  I refreshed my RL411 many years ago and noted scarce parts.  I ordered the wing window seals for future  use like when I tore the doors apart to replace the sliding glass and lower glass weather strips.  I have not yet gotten around to them!  BUT! I am not going to give up what may well be the sole surviving 410 / 411 set of original wing window weather seals in factory packging. 

 

If it would make any sense, I can post the Datsun part numbers.

 

BTW, you can silence window rattle by slipping cardboard match stick between the window felt and the steel doors.  Ask me how I know!  You can't keep a 50 year old vehicle going without learning some off the book work arounds!

Share this post


Link to post

ha, the window felt you can get!

But you/I cannot get  the time to open up the doors and install them.  I am a lazy fabricator of the parts that I have squirreled away,

Share this post


Link to post

If it would make any sense, I can post the Datsun part numbers.

 

Please do. Mine are on their last legs. 

Share this post


Link to post

Can I get some seeds so I can plant a 521 wing window rubber tree in my yard?

  • Like 1

Share this post


Link to post

if mike would let me borrow his, i could pour some molds.....

 

Ken

Share this post


Link to post

if mike would let me borrow his, i could pour some molds.....

 

Ken

 

You have access to creating molds for rubber parts. Cool! I was thinking of getting a 3D printer for remanufacturing other hard to find parts. 

Share this post


Link to post

if mike would let me borrow his, i could pour some molds.....

 

Ken

 

I would absolutely demand seeing the process, facility, and proprietor of the proposed reproduction site before I would even consider these No Longer Available and desirable parts out of my custody !  I will not risk  a future total as built restoration of my original RL411 on some vague "I can get them reproduced" statement !  Back yard or amateur  attempts just won't cut it.  Not that I don't trust your desires and wants, but I have an irreplaceable pair of parts.  Example, what mix and durometer of rubber would you specify?

 

Not being totally negative but I must preserve my irreplaceable parts!

Share this post


Link to post

Please do. Mine are on their last legs. 

 

I will have to dig into my rare parts stash to get the part numbers.  They are in the bottom of my "To Do"  box.  Please bear with me, I have a lot on my to do list, like 2 weddings in the family.

Share this post


Link to post

   Mike,

 

   This is JP from Houston I read your old posting about 411 wing window rubber seals and I am trying to revive it to find a solution. Mine are shot and I've been considering several alternatives: Using black silicone caulking been the crudest; another one is using Flexane throwable. I also ordered some 520/521 rubbers from Australia thinking they where a close match, and I am under the impression they are not longer, but shorter (I know you said the oposite, but I use my 521 set and I have to strech it to fit) and could be made to work as you pointed out somewhere, but again not in a full functional way, so I was pondering instead the manufacture of this by some company like Vintage Rubber who appear already making them for the 520/521. 

   Since you mentioned you have an original set I just wonder if you are interested in making this happen. I will fund the project and provide support to make this happen. Please let me know if you are interested, since Vintage rubber is in California it would be easier for you to talk to them and smooth any wrinkles out and see if they are on the level.

   I do have an extra vent and my pair of 520/521's if that helps.

 

Regards,

 

JP

 

Share this post


Link to post

i should see Mike tomorrow at the JCCS, I will try to follow up with him.

 

Ken

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use.