iancshafer Posted December 5, 2015 Report Share Posted December 5, 2015 I swapped a bad distributor on my 510 L18 with a d4a2-01 hitachi, but the old cap doesn't fit. The new distributor's body is slightly wider... Anyone have the part number for the cap that fits the d4a2-01? 1 Quote Link to comment
datzenmike Posted December 5, 2015 Report Share Posted December 5, 2015 Likely from an L20B, maybe an L18 and I think they are all the same 21162-U6001 Just ask for a cap for a '79 200sx and you'll get it. But to be sure..... Look on the side of the casting and find the stamped part number 22100-????? With this I can identify exactly what it was from. For example 22100-W5801 was used in the '79 S10 (200sx) and the '79 A10 (PL510) 1 Quote Link to comment
Jester Posted December 5, 2015 Report Share Posted December 5, 2015 Mike, is there a list somewhere that has them all in one list? That would be cool. 1 Quote Link to comment
datzenmike Posted December 5, 2015 Report Share Posted December 5, 2015 Good question. That would be a lot of distributors as there were differences between models even in the same year then all California were different from federal. And it's all about emission changes. This list is not complete... http://www.newprotest.org/projects/510/dizzy_specs.htm 1 Quote Link to comment
Jester Posted December 6, 2015 Report Share Posted December 6, 2015 Cool. Thanks Mike. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.