Jump to content
powerbench

Sometimes shit just works out

Recommended Posts

Ok,

The seats ...the need to be re cover, but they are recaro seats.....might see how much they would cost to re skin.Inner fender supports NOS...The front fenders , the valance the rockers and the rocker trims were in the first batch i got. I got 2 more A15 motors that i gave to a buddy that races a sedan,( he gave me a lead that may or may not pan out).

I got the polished crank out of a block that looked good ,but i already have 3 ( it had a 486 lift cam in it ) I got 3 more heads ( 2 of which look like they have almost no miles on them ) NOS lower rad hose and hose clamps .Couple of bullet mirrors( i stripped them and scotch brite them) There is also a floor support that i haven't figured out where it goes. also i found the 4 100+ rims i was looking for,

Here comes the pics

image.jpg1_zps7vgvxm5c.jpg

 

image.jpg3_zpsfwr3gyj4.jpg

 

image.jpg6_zpsi1d8t7f2.jpg

 

image.jpg2_zps02kj7oel.jpg

 

image.jpg7_zpsphsqxp4o.jpg

image.jpg8_zpseraicdxm.jpg

image.jpg3_zpsekkk1btq.jpg

 

image.jpg1_zps2wb7talz.jpg

 

image.jpg1_zpsqfqtu2tq.jpg

image.jpg1_zpsc7nparo9.jpg

  • Like 1

Share this post


Link to post

And this really should have been posted in the 1200 section...    ^_^

Share this post


Link to post

I think im gonna keep the su's . I'm thinking of building a gx style motor( I've got the head and a set of flat tops.Ya i guess i should have stuck this in the 1200 section....if the mods want to move me, that would be cool. My car goes in for much needed repair on April 2 or the following week, as soon as she comes back I'll make a choice as to which motor goes in , and which tranny I'm putting in.

Share this post


Link to post

Postal service for small stuff would work out.  Don't know about the Transmission and some of the other big items, Trucking company would be the best approach.

Want that dog legged tranny.....!

Share this post


Link to post

Is that the  front door kick plates? On the pictures where the dash is? left low corner...

Share this post


Link to post

Big stuff can be shipped with Grainger for dirt cheap if you have one nearby to drop and pick up from

  • Like 1

Share this post


Link to post

I would be interested in a single sidedraft intake manifold...

Share this post


Link to post

The pic that your thinking a are sill plates are my shitty blinds for my basement.

Most of the single side draft intakes have been bought already as well as the dual ones. I've kept one cannon , and 1 Lynx intake for myself( my cars getting one ) I kept a oval port single as well as a dual su flat set for the gx head I got

I took the 2 tranny's apart to double check the condition before I sell them . Both need bearings and synchro kits .... They have no chipped or broken gears ....I'm gonna look at my good 60a and make sure I don't need parts for mine

Share this post


Link to post

I've shipped everything canada post so far except something heavy

Share this post


Link to post

Thank you so much for selling me vents.  I am still so pumped i have a full set!!

Share this post


Link to post

No problem Matt....I can't keep it all ...( wife won't let me)

Share this post


Link to post

Ok ,an  ad has been stuck in the classifieds....need to get my heap fixed

 

Top of every page just under the RATSUN.NET logo is a link to the classifieds.

 

This is all going to have to be done by private messenger. Contact the seller? privately. Click on his name and go to his profile age there is a link there for private messages.

  • Like 1

Share this post


Link to post

So ,

Almost one year later after I got the locker and the stuff, I was able to locate the cars. I cant have the cars quite yet ...and they are pretty rough, but they have some stuff I need . Just a teaser I  got today ....I hope to get the rest this week. Maybe it can help the bleeding stop on my car .

 

image_zpscpu8thwf.jpeg

 

image_zpsnaw4plqn.jpeg

 

image_zps6jayrk8k.jpeg

  • Like 1

Share this post


Link to post

whenever you are ready to sell some item, please let me know as Im interest on couple of stuff

Share this post


Link to post

washinton here i would love a chance o buy some of those parts for my 1200

Share this post


Link to post

As soon as the other two cars make it home, I'll be going through the stuff and liquidating some spares

  • Like 1

Share this post


Link to post

Need a complete dash assembly and the side markers, also the tai lights are for a Sedan or Hatchback?

  • Like 1

Share this post


Link to post

Need a complete dash assembly and the side markers, also the tai lights are for a Sedan or Hatchback?

 

You mean sedan or coupe (not a hatchback). And they're for a coupe.  ^_^

Share this post


Link to post

Need a complete dash assembly and the side markers, also the tai lights are for a Sedan or Hatchback?

 

different tails tooo ... teddy johnson has some sedan tails ... 

  • Like 1

Share this post


Link to post

powerbench please let me know asap as i have a coupe in need of alot of interior stuff

Share this post


Link to post

different tails tooo ... teddy johnson has some sedan tails ...

Yes, looking for a Sedan tail lights, he can email me at Jose.malave@us.army.mil and let me know price

 

Definitely need the dash assembly

  • Like 1

Share this post


Link to post

powerbench please let me know asap as i have a coupe in need of alot of interior stuff

will do....if the one car comes through it has a bunch of plastic

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use.