tubbedbaggedstockfloored65 Posted September 24, 2015 Report Share Posted September 24, 2015 Hey there guys,picked up a new project.lots of work to do Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 First thing that happened was the removal of front and rear hideous square bumpers that were slowing me down, this thing came with an l20b and it wasn't long before that was out Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Around same time bumpers and motor were removed ,yep you got it I went Moar low haha ,3 inch blocks in back and cut a coil out in front Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Out with the interior and that horrible thick liner that breaks up with screwdriver and hammer,I no there's bound to be rust under this stuff Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Quote Link to comment
Draker Posted September 24, 2015 Report Share Posted September 24, 2015 Looks like a cool car. Was this an aborted V8 swap? Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Darker haha well the l20b was removed and the engine bay cut out for fitment,cutting was done by previous owner and pretty sloppy so I will need to fix that and make a new firewall peice,but it got a few coats of purple on it while no motor was in it,ran out of paint,and some rust protector on b inner fender wells after being cleaned,....previous owner put hooligan on there I can't stand that crap,sorry for those who I offend ,but unless u got 300 to 1000 hp,don't put that on the car Anyways need to get a new rear back passenger door window it was gone when I got it Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Draker sorry and when i post the next few pictures you'll see that I made good use of the missing firewall chunk and all that room ;) Quote Link to comment
Draker Posted September 24, 2015 Report Share Posted September 24, 2015 No need to be sorry. Waiting on more pictures. Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Quote Link to comment
tubbedbaggedstockfloored65 Posted September 24, 2015 Author Report Share Posted September 24, 2015 Z31 vg30e motor with harness uncut and ecu . the harness in 710 is uncut and still there.still need to finish engine and transmission mounts and get it sitter right for driveline tunnel and see about hood fitment Quote Link to comment
tubbedbaggedstockfloored65 Posted September 26, 2015 Author Report Share Posted September 26, 2015 Got bored trying to use datsun 620 cowl as front lip air dam thingy going to round off front edges and probably shave those vents ,because poor and ratsun Quote Link to comment
tubbedbaggedstockfloored65 Posted September 26, 2015 Author Report Share Posted September 26, 2015 Trying to get a can am box from ice house and info from him and datzenmike to help me get this thing together and wired up Quote Link to comment
INDY510 Posted October 22, 2015 Report Share Posted October 22, 2015 For Sale already?? ... http://skagit.craigslist.org/cto/5279506641.html Quote Link to comment
Draker Posted October 22, 2015 Report Share Posted October 22, 2015 Wow.. completely fucked that one up in a hurry. Quote Link to comment
bonvo Posted October 22, 2015 Report Share Posted October 22, 2015 Trade ya a mini bike for it? Quote Link to comment
tubbedbaggedstockfloored65 Posted November 21, 2015 Author Report Share Posted November 21, 2015 Had to move and didn't think I could keep it where I would be living,but turns out I get to keep it and store it in safe place,and have required a 427 from bill and I have a straight axle layin around,and I acquired some 4 lug slicks for back,so tubbing and shortening of rear end will be happening,I'm going to go different route and make a gasser out of it Quote Link to comment
tubbedbaggedstockfloored65 Posted November 21, 2015 Author Report Share Posted November 21, 2015 Indy510 and draker, nice comments. ..but no I'm keeping it thanks to someone providing storage Quote Link to comment
tubbedbaggedstockfloored65 Posted November 21, 2015 Author Report Share Posted November 21, 2015 I have since then cut out rust hole on rear quarter and have been grinding away at battery tray rust and trunk rust, Reinstalled dash hooked up wiring harness put back seats back in as well as door panels and arm rests and window handles Quote Link to comment
Draker Posted November 21, 2015 Report Share Posted November 21, 2015 Ok, proceed. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.