bananahamuck Posted September 10, 2015 Author Report Share Posted September 10, 2015 Oh and i got the fuse box soaking in the old vinegar bath of science,,, so fingers crossed.... But Ted dropped off a really nice 521 fuse box that will work if i change the 4 and 2 inputs,, into 3 and 3 using a copper jumper bridge. 5 Quote Link to comment
bananahamuck Posted September 12, 2015 Author Report Share Posted September 12, 2015 Today i got lights all to work correctly and put in an alternator my fucking idiot friend gave me ,,,,,,, So after i cut out the melted wires :sneaky: i am going to install 93 pathfinder alternator we had laying around... Just have to go to the picker of pullness in the morning to get a pigtail as my dingleberry of a son has lost the ones he had as extras.. 4 Quote Link to comment
510freak Posted September 13, 2015 Report Share Posted September 13, 2015 How did I miss this thread,Nice find on this one Andrew looks purdy :hyper: 2 Quote Link to comment
DaBlist Posted September 14, 2015 Report Share Posted September 14, 2015 I would say,, more of a place where younger generations come to learn the phrase,,, nope not selling that either . And don't mess with Nanner's stuff, he's got surveillance 2 Quote Link to comment
bananahamuck Posted September 14, 2015 Author Report Share Posted September 14, 2015 Hooked up heater and it took me forever to realize the heater didn't work because someone haf=d removed the ground off the back of it,,,, DOH!! Installed the wiper motor system out of the donor car as 411 came without one,,,,,,,,, and i believe the reason the wiring caught fire in the first place was that the drivers side pivot was seized up ,... Took me 2 days of heating cooling over and over to free that turkey up... BUT success!! and it didn't even break,,, which is pretty much a miracle of biblical proportions.. Made this out of polypropylene plastic sheet i had laying around,, because center mounting holes were destroyed when i took fuse box out of car in back. Unwrapping to check for breaks in wire before mounting unnder dash permanently .. and one for 510freaks old avatar 4 Quote Link to comment
bananahamuck Posted September 14, 2015 Author Report Share Posted September 14, 2015 The struggle is real my friends!!! 4 Quote Link to comment
uberkevin Posted September 14, 2015 Report Share Posted September 14, 2015 Nice 2 Quote Link to comment
MicroMachinery Posted September 14, 2015 Report Share Posted September 14, 2015 I'm inspired to finish some wiring I've been procrastinating on. 2 Quote Link to comment
bananahamuck Posted September 15, 2015 Author Report Share Posted September 15, 2015 So i was giving the electrics one last smoke test before installing dash,,,,,,,,,,,, and member Scalp-um was over hanging and hoping to see something to catch fire... I got talking with him while i was soldering an extra ground for the heater ,,,,and i completely forget i left key on,,,,,,,,, Boom! ,, ssssssssssssssssssssssssssssssssssssss . oil is everywhere. :rofl: :rofl: 2 Quote Link to comment
hobospyder Posted September 15, 2015 Report Share Posted September 15, 2015 Dammit nanners That's fucking hilarious :rofl: :rofl: :rofl: 1 Quote Link to comment
MikeRL411 Posted September 15, 2015 Report Share Posted September 15, 2015 Hooked up heater and it took me forever to realize the heater didn't work because someone haf=d removed the ground off the back of it,,,, DOH!! Installed the wiper motor system out of the donor car as 411 came without one,,,,,,,,, and i believe the reason the wiring caught fire in the first place was that the drivers side pivot was seized up ,... Took me 2 days of heating cooling over and over to free that turkey up... BUT success!! and it didn't even break,,, which is pretty much a miracle of biblical proportions.. Made this out of polypropylene plastic sheet i had laying around,, because center mounting holes were destroyed when i took fuse box out of car in back. Unwrapping to check for breaks in wire before mounting unnder dash permanently .. and one for 510freaks old avatar That poly sheet is a really good improvement! I had some conductive debris [probably trimmings from wire end reterminations or brake line remod] lodge under the fuse box and short out and melt a hole in the fuse box cover. Fortunately this was that long ago magic land where you could go the local dealer and order [and get delivered] a complete original fuse box assembly. I cut my insulator from a plastic milk bottle! 1 Quote Link to comment
q-tip Posted September 15, 2015 Report Share Posted September 15, 2015 I'm inspired to finish some wiring I've been procrastinating on. I'm going on 11 years on my wiring job, how about yours? Quote Link to comment
datzenmike Posted September 15, 2015 Report Share Posted September 15, 2015 Thanks i will copy that off when i get a new color cartridge ( have been running on black for awhile cuz i'm cheeep) :lol: The one my neighbor brought over was in a service type manual ,, the drawings seemed bigger than on the PDF so it has quite a few more pages,, but it looks the same other than that.. And thanks for the encouragement,, :) . And thanks for the decidedly phallic picture example. It wasn't overlooked. :thumbup: 2 Quote Link to comment
hobospyder Posted September 15, 2015 Report Share Posted September 15, 2015 in triplicate even i had to show a coworker a toyota water pump gasket after i showed him that one :rofl: 2 Quote Link to comment
bananahamuck Posted September 23, 2015 Author Report Share Posted September 23, 2015 Got these from Tana yesterday,,,, for a few bucks and installing bird screen on her chicken coupe. 6 Quote Link to comment
graveltrapp Posted September 23, 2015 Report Share Posted September 23, 2015 Your finnaly driving a periot correct rig. If you need a r16 engine minus head it is yours for the taken. Might solve your knocking. 1 Quote Link to comment
]2eDeYe Posted September 23, 2015 Report Share Posted September 23, 2015 So i was giving the electrics one last smoke test before installing dash,,,,,,,,,,,, and member Scalp-um was over hanging and hoping to see something to catch fire... I got talking with him while i was soldering an extra ground for the heater ,,,,and i completely forget i left key on,,,,,,,,, Boom! ,, ssssssssssssssssssssssssssssssssssssss . oil is everywhere. :rofl: :rofl: You do good work :thumbup: :lol: 2 Quote Link to comment
MicroMachinery Posted September 23, 2015 Report Share Posted September 23, 2015 I'm going on 11 years on my wiring job, how about yours? 2 Quote Link to comment
q-tip Posted September 23, 2015 Report Share Posted September 23, 2015 2 Not bad, but I expect more from you. Quote Link to comment
bananahamuck Posted September 24, 2015 Author Report Share Posted September 24, 2015 Your finnaly driving a periot correct rig. If you need a r16 engine minus head it is yours for the taken. Might solve your knocking. Thanks man, but it's a J13 ,, i have a deal worked out for a free one already.. :) I have been collecting parts for swapping a 4Age into one of these for awhile but that is quite a task so not jumping into that right away,, and a roadster rearend so i can put wider tires in the back and still lower it some... And yes as of today i have a line on 3 different ones,, after mentioning to those guys about someone kinda blowing me off about wanting to buy one... Might do the A14 5speed thing if the dead guys inlaws decide not to sell me a sweet B210 in a field,, i have also been collecting parts for... don't know yet. Quote Link to comment
MicroMachinery Posted September 24, 2015 Report Share Posted September 24, 2015 Not bad, but I expect more from you. Don't underestimate my laziness.. That is my employer's mistake. 5 Quote Link to comment
q-tip Posted September 24, 2015 Report Share Posted September 24, 2015 I meant more laziness, I put the "pro" in procrastinate, I underestimate no ones laziness for mine it at a very high level. 1 Quote Link to comment
q-tip Posted September 24, 2015 Report Share Posted September 24, 2015 Naner stop saying you've been collecting parts for a purpose and just admit that you've had this crap laying around forever for no real reason, we're not your wife, you don't need to lie to us. 7 Quote Link to comment
bananahamuck Posted September 24, 2015 Author Report Share Posted September 24, 2015 What's up with the correct use of apostrophes this morning? 3 Quote Link to comment
DaBlist Posted September 24, 2015 Report Share Posted September 24, 2015 i have a deal worked out for a free one already.. :) I'll bet you've dealed for more free stuff than the rest of Ratsun combined. ,,,,,,Just saying because, jealous of all the shit you've stashed, that's now worth something...... 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.